User manual ZENEC ZE-NC5010

[. . . ] This unit is manufactured under license from Dolby Laboratories. The instruction manual contains important information and warnings about the operation of this unit. Please store it inside your vehicle to have access to it any time. nOTE: Text passages with this symbol indicate particular information, which is very important for correct operation. [. . . ] To unlock the unit with the super code, it's inevitable to send it back to an authorized ZENEC-dealer. If you want to change or deactivate the anti-theft code, you must enter a valid code rst. Always proceed according to the accompanying update guide. In order to enter the BCS-Menu press and hold the PIC-Button. Alternative operation: Depending on the function of the OE radio, it might occur that the up and left arrows as well as the down and right arrows have an identical function. if the predecessor of the E>Go was a CDC40 , CD70/Navi or DVD90/Navi: Functions of arrowkeys in the BCS-menu of the 5010 are rotated 90 degrees counterclockwise. You also need to keep the OK key pressed for at least one second to be able to trigger a function. After installation of the E>GO audio-adjustments cannot be performed via the OE board computer anymore. The TP button lights up orange when the radio station provides traffic announcements. The TA button lights up orange when a traffic announcement is transmitted. When AF and Region are activated, auto tuning to those stations within the region is assigned. When AF is activated and region is deactivated, auto tuning attempts to nd stations without any region boundary. When AF is activated and a radio signal is too weak, the tuner automatically switches to the best available frequency. When TA is activated, the unit will auto seek an available TP or TA station. When TA is activated and a traffic announcement is received, the current playing source is overridden by the traffic announcement automatically, if the tuner was last set to the FM band but not, if it was last set to the AM band. When traffic announcement is over, the current playing source will be resumed. Touch to enter the PTY menu, then touch to select a choice in the PTY menu. The unit will auto seek the next available PTY by increasing tuning frequency until the program type matches the PTY, if no match is found, the tuner will return to original radio and "None" is displayed. Touch to switch between the two submenus. Preset radio stations: Touch to recall preset stations or touch and hold to store a station, (total 6 stations for each band). Displays whether mono or stereo sound is playing. The unit automatically switches between mono and stereo, depending on the reception quality of the radio station. [. . . ] ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certi ed® device must be registered in order to play DivX Video-on-Demand (VOD) content. Com with this code to complete the registration process and learn more about DivX VOD. BASIC KNOCKLEDGE OF DISC Region Code: According to DVD sale region, the whole world is divided into six regions. A DVD disc can be played back only when the DVD region number is the same with the DVD disc. [. . . ]