User manual ZENEC ZE-NC524

[. . . ] MODEL N0: 2-DIN NAVICEIVER 15. 5cm/6. 1" LCD DISPLAY USER MANUAL English TABLE OF CONTENTS TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WARNINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PANEL CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You will, however, loose your connection if the distance exceeds ten meters. Auto Answer On/Off You can toggle automatic call answering On/Off. If Auto Answer is On and the phone is properly paired, the unit will pick up the incoming call automatically and you will hear the voice of the caller via your speaker. If Auto Answer is Off you need to accept or reject the call manually. 10. Search mode This icon opens an on-screen keyboard. Touch the character on-screen, touch to < button to delete a digit, touch begin searching. Return to BT main menu BT MENU GENERAL OPERATION Press the [SRC] button on the panel or the touch key to enter the main menu, touch [Setup] to enter the unit system setup menu, then touch BT to enter BT setting menu. ON Allow other phones to be paired besides the phone(s) which are already paired with the unit. OFF Only phones which have already been paired, will nd the unit. 19 OTHER MODES A/V MODE External peripheral devices with RCA audio and video outputs can be connected with the unit. For more details, please refer to <Electrical Connections Overall Diagram>. NAV MODE To be able to use the navigation system of your ZE-NC524, you are required to insert the SD-card into the naviceiver rst which is part of the set content. Do this with the ZE-NC524 in power off state. After insertion of SD card, start the unit and touch the navigation icon on the TFT screen to start nav mode. Please refer to the included, separate "navigation manual" . DVB-T MODE (OPTIONAL) This player is "DVB-T ready". By purchasing and installing the module ZE-DVB2000 you enable the DVB-T functions. Please refer to the separate manual of the ZE-DVB-2000. GPS ANTENNA INSTALLATION GUIDE Fix the GPS antenna for example on the dashboard, directly behind the windscreen. Make sure there are no obstacles in the way (ex. metal coated screen forces you to install it somewhere else). Also make sure that the signal receiving side of the GPS antenna is pointing upwards. NOTE: The navigation is only possible if your GPS antenna has a sufficient reception. 20 DEUTSCH ZE-NC524 SYSTEM SETUP AUDIO/VIDEO SETTING Three ways will lead you to the audio/video settings menu. [. . . ] Should your ZENEC product require warranty service, please return it to the retailer from whom it was purchased or the distributor in your country. This ZENEC product is warranted against defective materials or workmanship for a period of TWO years from date of purchase at retail. Warranty Limitations This warranty does not cover any damage due to: 1. Improper installation, incorrect audio or mains connection(s). [. . . ]