User manual ZENITH 42PC1DA-UB

[. . . ] 42PC1D 42PC1DA As an ENERGY STAR Partner LGE U. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. P/NO : 38289U0512D (0604-REV01) WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. WARNING / CAUTION FCC NOTICE TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Press the ENTER button to display the Confirming Your Settings screen. You can see your current settings. 2 4 Choose one of the options, press the ENTER button, and follow the on-screen instructions. 3 4 51 TV GUIDE ON SCREEN SYSTEM TM Change Channel Display 1 Change Channel Display lets you edit channel information that appears in Listings. With Change Channel Display you can : I Re-order the position of the channel in Listings. I Switch a channel: 1 G G G On - The channel is always displayed. Auto-Hide - The channel is only displayed when program information is available. 52 TV GUIDE ON SCREEN TM SYSTEM 2 Press the E N T E R button to display the Channel Editor screen. Then, highlight a channel and press the M E N U button. Highlight Go Back to Setup to close the menu, change no information, and return to the Setup Service Bar. Or make changes and when finished, press the E N T E R button to highlight Done. Press the E N T E R button again to close the menu and accept the changes. Highlight Cancel to close the menu, change no information, and return to the highlighted channel. 2 Change Default Options Change Default Options lets you change default settings in the following categories: I General Defaults I Record Defaults I Remind Defaults Highlight Change Default Options, and press the ENTER button. 1 General Defaults General Defaults lets you set defaults for the following: I The initial Info Box size when the TV Guide On Screen system is entered. Choices are No, Small, Large, and Last Used. (Default = Last Used) I The Info Box size rotation when the I N F O button is pressed while in the TV Guide On Screen system. Choices are No only, Small only, Large only, No & Small, No & Large, Small & Large, All. (Default = All) I Automatic entry into the TV Guide On Screen system (Auto-Guide) when the TV is powered On. (Default = Off) Highlight General Defaults, and press the M E N U button to display the General Defaults menu. Highlight Go to Service Bar to close the menu, change no information, and return to the Setup Service Bar. When finished, press the E N T E R button to highlight Done. Press the E N T E R button again to close the menu and accept the changes. Highlight Cancel to close the menu, change no information, and return to the highlighted option. TV GUIDE ON SCREEN TM SYSTEM 1 1 53 TV GUIDE ON SCREEN SYSTEM TM 2 Record Defaults This TV doesn't support recording feature. 2 3 Remind Defaults Remind Defaults lets you set defaults for the following: I Power On the TV, if Off, when a Reminder is scheduled. (Default = No) I Automatically tune the TV to the channel (TV must be On), when a Reminder is scheduled. (Default = No) I When to display the reminder screen, choices are 30 seconds to 15 minutes early, to 30 seconds to 15 minutes late, to On time. (Default = 1 min early) 3 54 TV GUIDE ON SCREEN TM SYSTEM Highlight Remind Defaults, and press the M E N U button to display the Remind Defaults menu. [. . . ] A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. I There is a problem in PC mode. (Only PC mode applied) The signal is out of range Vertical bar or stripe on background & Horizontal Noise & Incorrect position Screen color is unstable or single color I I Adjust resolution, horizontal frequency, or vertical frequency. Check the input source. I Work the Auto configure or adjust clock, phase, or H/V position. (Option) 124 APPENDIX I I Check the signal cable. [. . . ]