User manual ZENITH CP-29Q12P

[. . . ] Color Television OWNER'S MANUAL MODEL : CP-29Q12P Please read this manual carefully before operating your set. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. Internet Home Page : http://www. lge. co. kr P/N : 3828VA0187B (MC996A) Safety Precautions WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). [. . . ] Press the G button to select channel position and then D / E button to select the desired channel number. To select the favorite channel, repeatedly press the FCR (Favorite Channel Review) button. Five channels programmed appear on the screen one by one. +MOVE+{+NEXT CHANNEL CH. INPUT+++++++{ AUTO+PROGRAM{ MANUAL+PROG. { FINE++++++++{ FAVORITE+CH. { + TV + 69+ TVVVVV03VVVV TVVVVV10VVVV CATVV111VVVV CATVV125VV }{+MOVE+++ADJUST++Å +BACK Zoom Picture You can select the desired picture format (NORMAL, ZOOM IN or ZOOM OUT). · NORMAL : · ZOOM IN : This picture format is 4 to 3 of general TV. This screen is magnified to the upper/lower sides through ZOOM screens one by one. Each time press this button, the screen is more magnified than the previous screen. The bottom and top of the picture may be lost. · ZOOM OUT : This works in the opposite way of ZOOM IN. Press the F / G or ZOOM IN/OUT button to select your desired picture format. SSSZOOM SS131}{ SSSZOOM S - __31}{ 13 Picture control Enjoying the Eye Function The set will automatically adjust the picture according to the surrounding conditions with the display MAGIC EYE. Press the EYE button on the remote control. The display MAGIC EYE appears and the picture is adjusted automatically. AMBIENCE CHROMA CONTRASTOO 85 BRIGHTNESSO 54 COLORO O O O 50 SHARPNESSO 50 +++MAGIC+EYE MAGIC+EYE Auto Picture Control You can select picture modes programmed at factory as you prefer. Using the APC button 1. Press the D / E or APC button to select MAGIC EYE, CLEAR, OPTIMUM, SOFT or USER. Press the ENTER (n) button to exit. AUTO +++AUTO+PICTURE CCLEAR Using the MENU button 1. Press the MENU button until the PICTURE menu is displayed. Press the G and then D / E button to select AUTO PICTURE. Press the G button to enter the AUTO PICTURE mode. Press the D / E button to select MAGIC EYE, CLEAR, OPTIMUM, SOFT or USER. Press the ENTER (n) button to exit. CH. PICTURE AUTO+PICTURE{ MAGICOEYE CLEAR YNR+++++++++{ CLEAR USER+CONTROL+{ OPTIMUM SOFT USER YNR (Luminance Noise Reduction) To reduce the picture noise which may appear on the screen during watching the TV in a weak signal area. Press the MENU button until the PICTURE menu is displayed. Press the G and then D / E button to select YNR. Press the G button to enter the YNR mode. Press the D / E button to select ON or OFF. [. . . ] Connect the audio/video output jacks of the VCR to IN 1 (A/V) jacks on the back. Press the TV/VIDEO button to select VIDEO-1. Note:If you connect the audio/video output jacks of the VCR to the IN 3 (A/V) jacks on the side of TV, select VIDEO-3. The video playback is on the TV screen. OUT (R)-AUDIO-(L) VIDEO IN 2 IN 1 (MONO) Note: In case of MONO VCR, connect the output jack of VCR to the AUDIO-(L)/(MONO) IN jack of TV so that the sound can be heard from both speakers. [. . . ]