User manual ZENITH D60DVSAS SETUP GUIDE

[. . . ] D60DVSA D60DVSAS 60V PDP Speakers & Speaker Stand Installation and Setup Guide P/NO : 3828VA0279B Speaker Installation - Speakers can be mounted: On the Monitor, (See below) On a flat desk-type surface. [. . . ] Place the speakers in the position you want. Install the speaker wires on the monitor and speaker. Be sure to connect the positive "+" wire to the "+" input and the negative "-" wire to the "­" input. Connect left monitor input to left speaker and right monitor input to right speaker. Any extra speaker wire length remaining can be bunched into the wire holders provided, see 1 above to install wire holders. (Caution: Once installed, the speaker wire holders lock into position and can't be removed. ) 206-3732 5 Accessories 4-Iron Plates (Mount speakers to monitor. ) 8- Small Bolts (Attach iron plates to speakers. ) 4-Large Bolts (Attach iron plates to monitor. ) 2-Speaker Wire Holders (for arranging the speaker wires. ) Zenith 2-Speaker Wires Installation and Setup Guide 206-3732 6 Specifications Name of Product Impedance (ohms) Rated Input (watts) Maximum Input (watts) Width (inches / mm) Height (inches / mm) Depth (inches / mm) Weight (pounds / kg) 60V PDP Speakers 8 10 20 5. 3 / 135 34. 8 / 883 3. 9 / 99 5. 5 / 2. 5 206-3732 7 60V PDP Speaker stand How to mount speaker on Speaker stand Speaker Speaker stand G Assemble each speaker stand and speaker by screwing the two bolts in the clockwise direction shown in 1 above. [. . . ] To detach the speaker form the stand, unscrew the two bolts in the opposite direction. 206-3732 8 Accessories Zenith 4 Bolts Installation and Setup Guide Specifications Name of Product Width (inches / mm) Height (inches / mm) Depth (inches / mm) Weight (pounds / kg) 60V PDP Speaker stand 8. 7 / 220 8. 6 (38. 5) / 218 (978. 5) *The value in ( ) is the height of the assembled speaker and stand. 8. 7 / 220 4 / 1. 8 206-3732 9 Memo 206-3732 10 Memo 206-3732 11 206-3732 [. . . ]