User manual ZENITH DVB211 OPERATING GUIDE

[. . . ] Installation and Operating Guide | Warranty Model Number | DVB211 | DVD Player © Copyright 2002, Zenith Electronics Corporation Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Rear of DVD player COMPONENT VIDEO OUTPUT S-VIDEO OUT Y VIDEO OUT S-Video connection Connect the S-VIDEO OUT jack on the DVD Player to the S-Video in jack on the TV using the supplied S-Video cable (S). Left and of the 2 Connect the tosuppliedRight AUDIOinOUT jacksthe TV DVD Player the audio left/right jacks on (A) using the audio cables. 10 Connections (Continued) Connecting to Optional Equipment Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround Connect the Left and Right AUDIO OUT jacks on the DVD Player to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the supplied audio cables (A). Notes ­ If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. ­ Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. ­ To see the audio format of the current DVD in the OnScreen Display, press AUDIO. Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2, or DTS) Rear of DVD player DIGITAL OUT AUDIO OUT 1 2 Connect one of the DVD Player's DIGITAL AUDIO OUT jacks (or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (coaxial X) audio cable. You will need to activate the player's digital output. (See Digital Audio Output on page 14). COAXIAL L R S-VIDEO OUT VIDEO OUT Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your DVD Player (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver. Caution: Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected. X A COAXIAL DIGITAL INPUT L R AUDIO INPUT Amplifier (Receiver) 11 PREPARATION Before Operation General Explanation This manual gives basic instructions for operating the DVD Player. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD Player or is not available on the disc. Temporary Feedback Field Icons TITLE Repeat Title Repeat Chapter Repeat A-B Repeat Off Resume play from this point Action prohibited or not available CHAPT A B OFF On-Screen Display General playback status can be displayed on the TV screen. Some items can be changed on the menu. On-screen display operation 1 Press DISPLAY during playback. 3 Press 1 or 2buttonsnumber). also someoffunctions, The number can be be used for setting numbers (e. g. , title For press SELECT/ENTER to execute the setting. DVD Notes Some discs may not provide all of the features on the on-screen display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. Items Title Number 1/3 4 Function (Press 3/4 to select desired item) Shows the current title number and total number of titles, and skips to the desired title number. Shows the current chapter number and total number of chapters, and skips to the desired chapter number. Shows the elapsed playing time, and searches the point by the elapsed time directly. Shows the current audio soundtrack language, encoding method, and channel number, and changes the setting. Shows the current subtitles language, and changes the setting. Shows the current angle number and total number of angles, and changes the angle number. Shows the current sound mode, and changes the setting. Selection Method 1 / 2, or Numbers, SELECTS/ENTER 1 / 2, or Numbers , SELECTS/ENTER Numbers , SELECTS/ENTER 1 /2 1 /2 1 /2 1 /2 Chapter Number Time search Audio language and Digital Audio Output mode Subtitle language Angle Sound 1/12 0:16:57 1 ENG D 6 CH OFF 1/1 NORM. 12 Before Operation (Continued) Initial Settings You can set your own Personal Preferences on the player. Menu Language Select a language for the setup menu. [. . . ] The DVD player does not start playback. The disc is dirty. The disc is not placed within the guide. The Rating level is set. The remote control does not work properly. The remote control is not pointed at the remote sensor of the DVD player. The remote control is too far from the DVD player. [. . . ]