User manual ZENITH DVB318 OPERATING GUIDE

[. . . ] DV7832NXS_Zenith Installation and Operating Guide | Warranty Model Number | DVB318 | DVD Player © Copyright 2003, Zenith Electronics Corporation CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. [. . . ] Follow the instructions shown for each menu screen. You also may set PBC to Off (See "PBC" on page 14). Notes · If parental control is active and the disc is not within the rating settings, you must input the password. (See "Lock Menu" on page 15. ) DVDs may have a region code. Your player does not play discs that have a region code different from your player. The region code for this player is 1 (one). Search 1. or > for about two seconds during playback . or > repeatedly to select the required speed. DVD; X2, X4, X16 or X100 Video CD; X2, X4 or X8 3. Tip: You can also select the search speed by rotating and holding the SHUTTLE ring during playback. The search speed is changed when you rotate and hold SHUTTLE ring at a new position. · 16 Still Picture and Frame-by-Frame Playback DVD VCD Notes: · On a Video CD with PBC, you must set PBC to Off on the Setup menu to use the repeat function (See "PBC" on page 14). If you press SKIP/SCAN (>) once during Repeat Chapter (Track) playback, the repeat playback stops. DVD VCD 1. Press PAUSE/STEP on the remote control during playback. Advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly. Slow Motion DVD VCD · Repeat A-B 1. Rotate and hold SHUTTLE ring during still picture mode. Rotate and hold SHUTTLE ring forward or reverse to select the required speed: 1/16, 1/8, 1/4 or 1/2 backward or forward. Release SHUTTLE ring to resume the still picture mode. Note: VCDs do not have no reverse slow motion playback. Press A-B at your chosen starting point. "A -" appears briefly on the TV screen. Press A-B again at your chosen end point. [. . . ] Repaired or Replacement Unit is warranted for the remaining period of the original warranty. HOW SERVICE IS HANDLED: This is an Exchange Product. Call 1-877-993-6484 for instructions on getting the defective unit replaced. Please retain dated sales receipt and your box to return the unit to Zenith for replacement. [. . . ]