User manual ZENITH DVC2550 OPERATING GUIDE

[. . . ] machine number | DVC2550 enjoy the view ® operating guide / warranty PAGE 2 INTRODUCTION Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVERTISSEMENT RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated `dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: CAUTION: ATTENTION: CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. [. . . ] q Set the playback picture size according to the aspect ratio of the connected TV at the SETUP menu (TV Aspect). q If you do not have the necessary equipment to enjoy Dolby Digital (AC-3) sound, set the Digital Audio Output at the SETUP menu to "PCM". menu search random repeat clear disc skip / skip/scan / menu select/enter 1 Press POWER. The DVD player turns on and the power indicator lights up. 1 2 disc select 3 4 5 disc exchange play pause/ step stop power open / close 3 q 2 Press OPEN/CLOSE. The disc tray opens. You can open the disc tray by pressing this button even if the DVD player is in standby mode. 1 pause /step power dvd vcr catv tv 3 play Place a disc on the disc tray with the playback side down. There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction. Do not place anything except 3" discs or 5" discs on the disc tray. Discs can be loaded one at a time by pressing DISC SKIP or DISC SELECT (1 - 5) to rotate the carousel. q skip skip stop select/ enter open/close ch vol setup 2, 4 q q vol ch display return/tv input 1 4 7 clear 2 5 8 0 3 sound/mute Caution: Do not touch the loading drawer and carousel while they are in motion, and do not attempt to rotate the carousel by hand; doing so could result in incorrect operation of the player and/or damage to the discs. 6 program 9 title menu 4 Press OPEN/CLOSE to close the loading drawer. The disc on the tray 1 is ready to be played back. Playback may begin automatically depending on some DVDs. If no disc is loaded on the disc tray 1, select another disc by following step 5. audio subtitle angle marker-search disc skip repeat a-b random zoom q q slow/scan rev fwd Do not close the loading drawer by hand. If the disc is placed in upside down (and it is a single sided disc), "NO DISC" or "DISC ERROR" appears on the TV screen. CD DVD TITLE CHP/TRK PROG. RANDOM ALL A B 2 3 1 4 5 Operating status indicator q q If you insert an audio CD, the CD indicator lights up in the DVD display. After playing back all of the chapters in the title, the DVD player automatically stops and returns to the menu screen. BASIC OPERATION PAGE 19 Basic Playback 5 menu search random repeat clear disc skip / skip/scan / menu select/enter 1 2 disc select 3 4 5 disc exchange play pause/ step stop If you want to select another disc, press DISC SKIP on the remote control once or more, or press DISC SELECT (1 - 5) on the front panel. Press PLAY to begin playback. Playback begins. You can skip this step if the disc is already played back automatically. power open / close 6 5 When a menu screen appears on the TV screen. In case of interactive DVDs with control, a menu screen appears on the TV screen. Perform step as below. 7 power dvd vcr catv tv Press D/E/F/G and press SELECT/ENTER, or press the numeric button(s), to select the desired item. Play of the selected item now begins. 6 skip play 1 2 skip OR stop 3 4 Example of interactive DVD On-Screen Menu 7 pause /step select/ enter open/close ch vol setup vol ch 7 q For further info, also refer to the jacket or case of the disc you are playing. display return/tv input 1 4 7 clear 2 5 8 0 3 sound/mute 6 program 9 title menu After operation When the unit is not in use, remove the disc and press POWER to turn off the power. Notes audio subtitle angle marker-search 5 disc skip repeat a-b random zoom slow/scan rev fwd Do not move the DVD player during playback. Doing so may damage the disc and the DVD player. Use the OPEN/CLOSE button on the remote control or DVD player to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the DVD player to malfunction. Do not push up the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video player to malfunction. Keep your fingers well clear of the disc tray as it is closing. [. . . ] Other Remotes with 3, 4, 5 & 7 Functions Available Upon Request ZEN 525 ONLY $19. 99 PLUS $6. 95 SHIPPING & HANDLING zenith ORDER TODAY!CALL OR FAX TOLL-FREE 1. 800. 255. 6790 Fax 1. 888. 693. 6484 email: parts. sales@zenith. com Use Your Visa or MasterCard to Order PLEASE ALLOW 3 - 4 WEEKS FOR DELIVERY Your Zenith Limited Warranty DVD PLAYER Welcome into the Zenith family!We believe that you will be pleased with your new Zenith Entertainment Machine. Please read this warranty carefully, it is a "LIMITED WARRANTY" as defined under Federal Law. [. . . ]