User manual ZENITH FFH-185A OPERATING GUIDE

[. . . ] Installation and Operating Guide Machine Number | F-185 (Main Unit : FFH-185A, Speakers : FE-185E) | MICRO AUDIO COMPONENT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: Do not install this equipment in a confined space such a book case or similar unit. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. CAUTION:INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. [. . . ] FLAT : linear frequency response ROCK : more bass, more treble POP : less bass, less treble CLASSIC : for orchestral music Headphone Socket. Connect a stereo headphone plug (3. 5mm) into the headphone socket. The speakers are automatically disconnected when you plug in the headphones (not supplied). AUXILIARY FUNCTION 1. TV or VCR, via the rear mounted AUX phono sockets. Press the "AUX" function button. NOTE: You can also record from the auxiliary input source, see Cassette Deck Function Section. 8 TUNER FUNCTIONS To listen to the Radio 1. Press the "TUNER/BAND" button repeatedly to choose either AM or FM radio. To tune to the desired station with automatic tuning, keep "TUNING (+)/(-) , ( )" button or depressed for more than 1 second. To tune to the desired station with manual tuning, press the "TUNING (+)/(-) , ( )" button within 1 or second repeatedly. When listening to FM stations press the "MODE/RIF" button for FM stereo reception. The "STEREO" will appear in the display. When a weak FM station is being received-press the "MODE/RIF" button so that "STEREO" is cleared from the display. NOTE: Use "MODE/RIF" (Radio Interference Filter) button to switch to mono reception if stereo reception is distorted by noise. When recording the MW(AM) or LW broadcast, beat noises occur. Presetting the stations 1. To clear any programm previously stored in any memory. (1) Press the "PROG. /MEMO. " button for 2 seconds in TUNER mode so that "RESET" flashes in the display. (2) Press the " STOP/CLEAR" button while "RESET" is flashing in the display. To memorize the stations in order (1) Press the "TUNER/BAND" button to select a desired wave band. (2) Press the "TUNING (+)/(-) ( )" button to select a or desired station. (3) Press the "PROG. /MEMO. " button on the unit and preset number flashes. (4) Press the "PROG. /MEMO. " button again on the unit while preset number is flashing. (5) Repeat step (2) to (4) to memorized up to 30 stations. To memorize in selection channel number. [. . . ] When you have selected the TUNER; Select the previous memorized preset number with the "TUNING (+)/(-)" buttons and press the "SET" button. Set the hour to switch on by pressing the "PRESET (+)/(-)" buttons. Press the "SET" button to confirm the hour to switch on. The minute with "ON" display flashes. [. . . ]