User manual ZENITH H20E50DT OPERATING GUIDE

[. . . ] Installation and Operating Guide | Warranty Model Number | H20E50DT | HealthView TM TV table of contents page 5 © Copyright 2002, Zenith Electronics Corporation RECORD THE MODEL NUMBER For Customer Support/Service please call: 1-888-865-3026 www. zenith. com The model and serial number of this HealthViewTM TV are located on the back of the cabinet. For future reference, we suggest that you record these numbers here: MODEL NO. ____________________________________ SERIAL NO. ____________________________________ WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. [. . . ] Selects a preset TV turn-off time, and shows remaining time before the TV turns off. VOLUME· CHANNEL PREVIEW· 5 ---9 ---20 - - - 32 - - - 44 - - - AUX - - - FM CH TO SELECT, ENTER TO QUIT CC FOR PARENTAL CONTROL Rating: TV-14 Ch 25 - PBS 7:15 PM OLD TIME MOVIES LENGTH 01:00 TIME LEFT 00:36 Volume Display Press VOLUME. Shows currently selected sound setting. Ch Preview Menu Press CH PREV. Displays list of the available TV Channels, AUX source, and patient Parental Control menu. Channel/Time/XDS Display Press ENTER. Shows currently selected channel, current time if the clock has been set, and XDS data, if being broadcast; title of program, length of program, and time remaining. INACTIVE TV PLEASE . CALL ATTENDANT Inactive TV Display Prompts patient to arrange for TV service to room. PAGE 26 206-3491-O Managing the Channel Banks Using the optional Installer's remote control, the TV has four channel banks, where the administrator or installer can store groups of TV channels PLANNING THE CHANNEL BANKS Generally, TV channels are grouped into "program packages" with terms that are proposed to the end user. Below is an example of how TV channels may be grouped. You may plan your package by using a chart like the one after the following page. Remember, you can "blank" a channel for accommodating audio-only, such as an FM radio station or in-house communication. Sometimes, only one or two channel banks may be needed. You may leave any unused bank with the channels entered during Auto Program; or, you may delete the channels. However, you may want to leave at least one channel in any unused bank. Then, if someone selects an "unused" bank, that channel will assure them that the TV is functional. Note: Some channels from factory testing may be in the channel banks if you have not yet run Auto Program. ADDING / DELETING CHANNELS A previously prepared programming chart is helpful. All channels found on your cable/antenna will be entered in Channel Banks 1, 2, 3, and 4. Note: Be advised that running Auto Program overwrites any custom channel setups; removes Blanked, Deleted. Select a channel bank with an installer remote - -press SOURCE/BANK (and repeat). CHANNEL BANK and BANK number will be displayed. CHANNEL BANK BANK 1 Channel Bank Program package 1 Basic cable channels 2 Extended cable channels 3 Extended with premium channels 4 Other cable installer options (Grouping is provided as an example only. ) 3. Use the ADD/DEL/BLNK item (also in the Setup menu) to customize your program package. You may delete channels or add some that have not been entered. You can also "Blank" a channel for accommodating an audio-only program source or in-house communication. [. . . ] Extended Data Service: Additional program information if provided by the broadcaster. 300 TO 75 OHM ADAPTER A/V DEVICE ADD AMPLIFIER ANTENNA AUTO PROGRAM DELETE INPUT JACK MONO SOUND OUTPUT SIGNAL TUNER XDS 206-3584-0 PAGE 43 Your Zenith TV Warranty Direct-View Color TV Welcome to the Zenith family!We believe that you will be pleased with your new TV. Please read this warranty carefully, it is a "LIMITED WARRANTY" as defined under Federal Law. This warranty gives you specific legal rights, and you may also have other rights that vary from state-to-state within the U. S. A. ZENITH'S RESPONSIBILITY Service Labor During a period of one year from effective warranty date, Zenith will provide service labor by a Zenith authorized service center when needed, as determined by the Zenith service center, as a result of manufacturing defects. [. . . ]