User manual ZENITH H27D35DT OPERATING GUIDE

[. . . ] machine numbers H27D35DT H36D35DT H32D35 DT C oncie rge T M TV s ® table of contents page 5 enjoy the view installation & operating guide / warranty © Copyright 2001, Zenith Electronics Corporation RECORD TV MODEL NUMBER The model and serial number of the ConciergeTM TV are located on the back of the TV cabinet. For future convenience, we suggest that you record these numbers here: MODEL NO. ____________________________________ SERIAL NO. ____________________________________ WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. [. . . ] AUTO PROGRAM removes any channels previously customized with ADD / DEL / BLNK. The channels available on your antenna / cable will be entered, and any channels previously entered but not currently available will be deleted. ADD and DEL (not BLNK) can be used independently for channel banks 1, 2, 3, and 4. A channel blanked, is blanked in all channel banks. Channel allocations in tuning bands: BROADCAST: 2 ­ 69 CABLE ­ CATV, HRC or ICC: 1 ­ 125 PAGE 28 206-3489-O Managing the Channel Banks PLAN YOUR CHANNEL BANKS BY FILLING IN THESE CHARTS (or use photocopies) B Purpose A N K 1 2 3 4 Channel Number 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 1 2 3 4 5 6 7 8 9 B Purpose A N K 1 2 3 4 Channel Number 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 B Purpose A N K 1 2 3 4 Channel Number 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 B Purpose A N K 1 2 3 4 Channel Number 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 B Purpose Channel Number A 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 FM N K 1 2 3 4 206-3489-O PAGE 29 Installer menus Use the Installer's Menus to make TV operation adjustments Accessing the Installer's Menu Installer's menus can be accessed by using the installer's remote control. Just press and hold MENU (about 8 seconds) until the display changes, then press 9, 8, 7, 6, then ENTER. To exit the Installer's Menu, press ENTER again. Any changes you make will be stored in nonvolatile memory. The Installer's Menu opens with item 03, POWER MANAGE. Press the SELECT key to sequence through the various items. Or, access an item directly by entering the line number, then pressing MENU. For example, to access the Start Channel option which is on line 11, press 11, then MENU. To change a current setting use the Left/Right ADJ keys. 1390-04 1. 45 01 03 POWER MANAGE 0 Using the Installer's Menu Items 00-24 are immediately accessible only upon entering the Installer's Menu. Their numbers, descriptions, ranges, factory default settings, and a place for listing any changes made on-site are given below. A second section of the Installer's Menu that is intended for qualified service technicians only is not shown (items 25-79). Normally these items do not require adjustment. XX/XX/OX TE = 10110000 Items in the Installer's Menu: Item 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Description FACT MENU PRESET PX PRESET AX POWER MANAGE VERT POS HORZ POS BAND/AFC MIN VOLUME MAX VOLUME AC ON KEY DEFEAT STRT CHANNEL STRT VOLUME HOSPITAL MODE CHAN LOCK GHOST CH. SCAN MODE TEXT MODE SLEEP TIMER ALARM CH. OVER RIDE OLD OCV CAPTION LOCK FUNCTION PRE FEATURE LEVEL Range 0-1 0-1 0-1 0-7 0 - 30 0 - 45 0-7 0 - 63 0 - 63 0-1 0-1 0 - 255 0 - 63, 255 0-2 0-1 0-1 0-3 0-1 0-1 0-1 0-1 0-1 0-1 0-1 0-1 Fact. Set 1 1 1 0 15 15 0 0 63 0 0 255 255 0 0 0 0 1 1 1 1 0 0 0 1 Zen 1/0 P Lbl Installer should leave item 1 FACT MODE set to 0 (default). Items 25-79 are service-type adjustments and only qualified technicians having specialized test equipment should access them. Recommend. Setting Leave default set 1 Leave default set 0 Leave default set 0 Leave default set 1 (1 Zen 1) PAGE 30 206-3688-0 Installer menus Use the Installer's Menus to make TV operation adjustments 00 FACT MENU (Factory Mode) Used to access and customize the 00 - 24 Installer's Menu settings using installer type remotes. 01 PRESET PX (Preset Picture) Saves your custom video settings (color, tint, contrast, and brightness) in nonvolatile memory (not affected by power loss). Memory status is indicated by a 1 for "custom settings already stored, " or 0 for "custom settings have not been stored. " Make all custom audio settings before you access the Installer's Menu and PRESET PX. [. . . ] This warranty gives you specific legal rights, and you may also have other rights that vary from state to state within the U. S. A. ZENITH'S RESPONSIBILITY Service Labor During a period of one year from effective warranty date, Zenith will provide service labor by a Zenith authorized service center when needed, as determined by the Zenith service center, as a result of manufacturing defects. New or remanufactured replacements for factory-defective parts will be supplied by a Zenith authorized service center for one year from effective warranty date (color picture tube -- two years). Such replacement parts are warranted for the remaining portion of the original warranty period. Warranty service is provided in the institution in most cases. [. . . ]