User manual ZENITH L15V26B OPERATING GUIDE

[. . . ] Installation, Setup & Operating Guide I Warranty Model Number | L15V26B | LCD-TV / Monitor with AC-DC Power Adapter © Copyright 2002, Zenith Electronics Corporation. RECORD YOUR MODEL NUMBER (For future reference) The model and serial number of your TV are located on the back of the TV cabinet. For convenience, we suggest that you record those numbers here: MODEL NO. _______________________________ SERIAL NO. _______________________________ WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] q See DVD/DTV user's manual for operating instructions. Component tv/video On Remote Control 206-3839 16 DTV (Set-top Box) Connections q Connect DVD/DTV output to COMPONENT(480i/480p/720p/1080i), Y, PB, PR jack inputs on the TV. Connect DTV L/R audio outputs to the TV's AUDIO L/R input jacks. Note: A DTV set-top box is required to receive DTV programming. 1 Connections INSTALLATION PC SOUND PC INPUT H/P S-VIDEO VIDEO (MONO) L IN AUDIO R Y PB PR L AUDIO R ANT IN +75 DC 12V COMPONENT(480i/480p/720p/1080i) DVD/DTV IN TV Connections Panel Y PB PR (R) AUDIO (L) DTV Receiver (Set-top Box) Connections Panel 2 Viewing Setup q Turn on the DTV receiver (Set-top Box). q Turn the TV on and use tv/video button to select Component source. Component tv/video On Remote Control 206-3839 17 PC/Computer Connections (using TV as a Monitor) * After setup, be sure to select RGB-PC to see the PC image on TV screen. 1 Connections q Set the monitor output resolution on the PC before connecting to the TV. q Connect the TV to the PC with the PC cable. q Connect the PC audio output to the TV's PC SOUND input. PC SOUND PC INPUT H/P S-VIDEO VIDEO (MONO) L IN AUDIO R TV Connections Panel PC Connections Panel 2 Viewing Setup q Turn on the PC/Computer. q Turn the TV on and use tv/video button to select RGB-PC source. RGB-PC tv/video On Remote Control 206-3839 18 Displayable Monitor Output Format Specifications MODE Resolution 640x400 640x400 640x480 VGA 640x480 640x480 640x480 640x480 720x400 800x600 800x600 SVGA 800x600 800x600 800x600 (MAC) XGA 832x624 1024x768 1024x768 1024x768 1024x768 Horizontal Frequency (KHz) 31. 5KHz 37. 9KHz 31. 5KHz 35. 0KHz 37. 9KHz 37. 5KHz 43. 3KHz 31. 5KHz 35. 2KHz 37. 9KHz 48. 1KHz 46. 9KHz 53. 7KHz 49. 7KHz 48. 4KHz 56. 5KHz 60. 2KHz 68. 67KHz Vertical Frequency (Hz) 70Hz 85Hz 60Hz 67Hz 72Hz 75Hz 85Hz 70Hz 56Hz 60Hz 72Hz 75Hz 85Hz 75Hz 60Hz 70Hz 75Hz 85Hz Notes: The TV has been pre-adjusted to use XGA1024x768, 60Hz format. If possible, use one of the XGA formats to obtain the best image quality for your TV/LCD monitor. If set up under other resolutions, a distorted picture may appear on the screen. If the message "OUT OF RANGE" appears on the screen, adjust the PC output to a format listed in the `Displayable Monitor Output Format Specifications' chart above. DPM (Display Power Management) mode When the PC is in the power saving mode, to also save energy, the monitor automatically switches to DPM mode. * The synchronization input form for Horizontal and Vertical frequencies is separate. 206-3839 19 INSTALLATION PC Mode Functions Check * After setup, be sure to select RGB-PC to see the PC image on TV screen. 1 Press the menu button repeatedly to display the menus as shown below. Picture CH. Sound G G G CH. APC DRP User DASP Balance AVL G G G FG Move G Next FG Move G Next Special CH. CH. Timer G PC Clock Off-timer On-timer G G G FG Move G Next FG Move G Next 2 20 Use the channel (D, E) buttons to select menu options. 206-3839 PC Mode Adjustments * After setup, be sure to select RGB-PC to see the PC image on TV screen. PC Setup 1 Use the menu button to select the Special Menu. Special CH. 3 Press the volume (G) and then use the channel (D, E) buttons to select an option you want to adjust. PC G PC Setup (H-position) G G (V-position) G Clock G Phase G Auto configure G Reset G FG 0 FG Move G Next Move G Next F Back q Each press of channel (D, E) buttons changes the screen display as shown below. 2 Press the volume (G) and then use the channel (D, E) buttons to select the PC option. H-position V-position Reset Clock Auto configure Phase 206-3839 21 INSTALLATION PC Mode Adjustments 4 Press the volume (G) and then use the volume (F, G) buttons to make appropriate adjustments. PC H-Position V-Position Clock Phase Auto configure Reset FG G G G G G G 0 Adjust A Back H-Position/V-Position q This function adjusts picture left/right and up/down. q The adjustment ranges are -100~+100 / -30~+30. Clock q This function minimizes any vertical bars or stripes appearing on the screen background. Phase q This function allows you to remove any horizontal noise and clear up or sharpen the character images. Auto-configure q This function is for the automatic adjustment of the screen position, clock and clock phase. (The displayed image will disappear for a few seconds while Auto-configuration is in progress. ) Reset q This function allows you to return to the default setting programmed at the factory; default settings cannot be changed. 5 Press the enter (A) button. * Some signals from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and clock phase manually. 206-3839 22 To turn the TV On TV Operation Overview 1 2 3 1 2 3 First, connect antenna cable and power cord with the adapter. Press on/off on the TV side panel. q Press power on the remote control to put the TV into standby mode. In standby mode, press the power, ch (D, E), tv/video and number button on the remote control or ch (D, E), tv/video on the TV side panel to turn on it fully. Select the viewing source by pressing tv/video on the remote control. q Note: See page 26 if you have not auto programmed the TV to receive channels in your local broadcast area. After viewing, press the power button on the remote control. Press the on/off on the TV side panel again to turn off the TV. Watching TV programs Press power on the remote control to turn the TV on. Use the channel (D, E) or number buttons to select a channel to view. Adjust Volume level. q Volume (G) button increases the sound level. q Volume (F) button decreases the sound level. Volume 45 + * If you want to turn off the TV, press the on/off button on the side panel of the TV. [. . . ] Be sure to turn the power off and pull out the plug before you begin any cleaning. Screen Cleaning 1. Here's a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it's almost dry, and then use it to wipe the screen. [. . . ]