User manual ZENITH L15V26D OPERATING GUIDE

[. . . ] Installation, Setup & Operating Guide I Warranty Model Number | L15V26D | LCD-TV / Monitor © Copyright 2004, LG Electronics USA, Inc. RECORD YOUR MODEL NUMBER (For future reference) The model and serial number of your TV are located on the back of the TV cabinet. For convenience, we suggest that you record those numbers here: MODEL NO. _______________________________ SERIAL NO. _______________________________ CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : BACK). TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. [. . . ] Insert a video tape into the VCR and press the PLAY button. 15 INSTALLATION Connecting a VCR External Equipment Connections Watching External A/V Source 1 S-VIDEO Connections q Connect the audio/video output jacks on the external A/V equipment to the corresponding input jacks on the TV. VIDEO (MONO) L VIDEO IN AUDIO R PC INPUT ANT IN +75 PC SOUND TV Connection Panel Camcorder CDGP Video Game set External Equipment Connection Panel VCDP R AUDIO L VIDEO CDI 2 Viewing Setup q q Turn on the external A/V equipment. Turn the TV on and use the tv/video button to select Video source. Video tv/video On Remote Control 16 DVD Player Connections q Connect DVD/DTV output jacks to TV's COMPONENT (480i/480p/720p/1080i), Y, PB, PR jacks, or S-video jack. Connect DVD/DTV audio output jacks to right and left input jacks on TV. 1 Connections INSTALLATION 17 AC INPUT Y PB PR H/P S-VIDEO VIDEO(MONO) L AUDIO R VIDEO IN PC INPUT L ANT IN +75 COMPONENT(480i/480p/720p/1080i) PC SOUND DVD/DTV IN TV Connection Panel Y PB PR (R) AUDIO (L) or S-VIDEO (R) AUDIO (L) DVD Connection Panel Note: TV INPUT Y PB PR DVD OUTPUT Y Y Y Y Cb B-Y Pb PB Cr R-Y Pr PR 2 Viewing Setup Turn on the DVD player. Turn the TV on and use tv/video button to select Component source. q See DVD/DTV user's manual for operating instructions. q q Component tv/video DTV (Set-top Box) Connections q Connect DVD/DTV output to COMPONENT(480i/480p/720p/1080i), Y, PB, PR jack inputs on the TV. Connect DTV L/R audio outputs to the TV's AUDIO L/R input jacks. Note: A DTV set-top box is required to receive DTV programming. 1 Connections AC INPUT Y PB PR H/P S-VIDEO VIDEO(MONO) L AUDIO R VIDEO IN PC INPUT L ANT IN +75 COMPONENT(480i/480p/720p/1080i) PC SOUND DVD/DTV IN TV Connections Panel Y PB PR (R) AUDIO (L) DTV Receiver (Set-top Box) Connections Panel 2 Viewing Setup q q Turn on the DTV receiver (Set-top Box). Turn the TV on and use tv/video button to select Component source. Component tv/video On Remote Control 18 PC/Computer Connections (using TV as a Monitor) - After setup, be sure to select RGB-PC to see the PC image on TV screen. q q Connect the TV to the PC with the PC cable. Connect the PC audio output to the TV's PC SOUND input. q VIDEO (MONO) L VIDEO IN AUDIO R PC INPUT ANT IN +75 PC SOUND TV Connections Panel PC Connections Panel 2 Viewing Setup q q Turn on the PC/Computer. Turn the TV on and use tv/video button to select PC source. PC tv/video On Remote Control 19 INSTALLATION 1 Connections Set the monitor output resolution on the PC before connecting to the TV. See the next page. PC/Computer Connections (using TV as a Monitor) Displayable Monitor Output Format Specifications MODE Resolution 640x400 640x480 640x480 VGA 640x480 640x480 640x480 800x600 800x600 SVGA 800x600 800x600 800x600 (MAC) XGA 832x624 1024x768 1024x768 1024x768 Horizontal Frequency (KHz) 37. 9KHz 31. 5KHz 35. 0KHz 37. 9KHz 37. 5KHz 43. 3KHz 35. 2KHz 37. 9KHz 48. 1KHz 46. 9KHz 53. 7KHz 49. 7KHz 48. 4KHz 56. 5KHz 60. 2KHz Vertical Frequency (Hz) 85Hz 60Hz 67Hz 72Hz 75Hz 85Hz 56Hz 60Hz 72Hz 75Hz 85Hz 75Hz 60Hz 70Hz 75Hz Notes: a. For optimum picture quality, use standard XGA (1024x768) computer output at a 60Hz refresh rate. Using other formats (i. e. : VGA, SVGA, etc) or refresh rates may result in reduced picture quality. (To change the computer video output format, please refer to the operating manual for the computer you are using). If the message "OUT OF RANGE" appears on the screen, adjust the PC output to a format listed in the `Displayable Monitor Output Format Specifications' chart above. The synchronization input form for Horizontal and Vertical frequencies is separate. DPM (Display Power Management) mode When the PC is in the power saving mode, the monitor automatically switches to DPM mode. 20 PC Mode Functions Check - After setup, be sure to select PC source to see the PC image on TV screen. 1 Use the menu button to display the available menu shown below. Contrast Brightness H-position V-position Clock Phase Auto configure Reset DE 80 60 0 0 40 16 Move FG Adjust Menu H-position/V-position Adjusts picture left/right and up/down. The adjustment ranges of H-Position is -100~+100. (Based on the input mode, the adjustment range may change. ) q Clock Minimizes any vertical bars or stripes appearing on the screen background. (Based on the input mode, the adjustment range may change. ) q Phase Remove any horizontal noise and clear up or sharpen the character images. (Based on the input mode, the adjustment range may change. ) q Auto-configure Automatically adjusts the screen position, clock, and clock phase. (The displayed image will disappear for a few seconds while Auto-configuration is in progress. ) q Reset Returns to the default settings programmed at the factory; default settings cannot be changed. q 21 INSTALLATION Turning the TV On TV Operation Overview 1 2 3 1 2 3 First, connect antenna cable and power cord correctly. [. . . ] Wring the cloth until it's almost dry, and then use it to wipe the screen. Make sure not to put an excessive amount of water on the screen, let it air-dry before you turn on your TV. Cabinet Cleaning 1. Use a soft cloth with a mild soap solution to wipe the cabinet. Rinse the cloth and wipe the cabinet again. [. . . ]