User manual ZENITH L20V36 OPERATING GUIDE

[. . . ] Operating Guide | Warranty Model Numbers | L15V36, L20V36 | LCD TV © Copyright 2003, Zenith Electronics Corporation. RECORD YOUR MODEL NUMBER (For future reference) The model and serial number of your TV are located on the back of the TV cabinet. For convenience, we suggest that you record those numbers here: MODEL NO. _______________________________ SERIAL NO. _______________________________ WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] q See DVD user's manual for operating instructions. q q Component tv/video On Remote Control 206-3922 20 DTV (Set-top Box) Connections - Connect DVD/DTV output to COMPONENT(480i/480p/720p/1080i), Y, PB, PR jack inputs on the TV. Connect DTV L/R audio outputs to the TV's AUDIO L/R input jacks. Note: DTV set-top box is required to receive DTV programming. ANT IN +75 Y PB PR L AUDIO R PC INPUT COMPONENT(480i/480p/720p/1080i) DVD/DTV IN PC SOUND VIDEO (MONO) L VIDEO IN AUDIO R TV Connections Panel Y PB PR (R) AUDIO (L) DTV Receiver (Set-top Box) Connections Panel 2 Viewing Setup q q Turn on the DTV receiver (Set-top Box). Turn the TV on and use tv/video button to select Component source. Component tv/video On Remote Control 206-3922 21 CONNECTIONS 1 Connections PC/Computer Connections (L15V36 Only) - After setup, be sure to set TV to select RGB-PC source on TV. 1 Connections q Set the monitor output resolution on the PC before connecting to the TV. Connect the TV to the PC with the PC cable. Connect the PC audio output to the TV's PC SOUND input. q q PC INPUT PC SOUND VIDEO (MONO) L VIDEO IN AUDIO R TV Connections Panel PC Connections Panel 2 Viewing Setup q q Turn on the PC/Computer. Turn the TV on and use tv/video button to select RGB-PC source. RGB-PC tv/video On Remote Control 206-3922 22 Displayable Monitor Output Format Specifications MODE Resolution 640x350 640x350 640x400 VGA 640x400 640x480 640x480 640x480 640x480 640x480 800x600 SVGA 800x600 800x600 800x600 800x600 (MAC) 832x624 1024x768 1024x768 XGA 1024x768 1024x768 Horizontal Frequency (KHz) 31. 4KHz 37. 8KHz 31. 4KHz 37. 8KHz 31. 5KHz 35KHz 37. 9KHz 37. 5KHz 43. 3KHz 35. 2KHz 37. 9KHz 48. 1KHz 46. 9KHz 53. 7KHz 49. 7KHz 48. 4KHz 56. 5KHz 60. 2KHz 68. 7KHz Vertical Frequency (Hz) 70Hz 70Hz 85Hz 60Hz 66Hz 72Hz 75Hz 85Hz 56Hz 60Hz 72Hz 75Hz 85Hz 75Hz 60Hz 70Hz 75Hz 85Hz 85Hz Notes: a. For optimum picture quality, use standard XGA (1024x768) computer output at a 60Hz refresh rate. Using other formats (VGA, SVGA, etc. ) or refresh rates may result in reduced picture quality. (To change the computer video output format, please refer to the operating manual for the computer you are using). If the message "Out of range" appears on the screen, adjust the PC output to a format listed in the `Displayable Monitor Output Format Specifications' chart above. The synchronization input form for Horizontal and Vertical frequencies is separate. DPM (Display Power Management) mode If the PC goes to power saving mode, the monitor automatically switches to DPM mode. 206-3922 23 CONNECTIONS PC Mode Functions Check (L15V36 Only) - After setup, be sure to select RGB-PC source on TV. 1 Press the menu button and then use channel (D, E) buttons to display the available menus shown below. Channel CH. edit Favorite ch. EZ Video User G G FG FG Move G Next Move G Next Special CH. CH. Sound G G PC PIP EZ Audio Balance AVL G G G FG FG Move G Next Move G Next Timer CH. Clock Off timer On timer Auto off G G G G FG Move G Next 2 24 Press the volume (G) and then use the channel (D, E) buttons to select menu options. - You're not available to use the Channel menu in Video1-2, S-Video, Component or RGBPC mode. If you operate the channel menu, PC mode is chaged to TV source automatically. 206-3922 PC Mode Adjustments (L15V36 Only) - Be sure to select the RGB-PC source before operation. PC Setup 1 Use the menu button and then channel (D, E) buttons to select the Special Menu. 3 Press the volume (G) and then use the channel (D, E) buttons to select an option you want to adjust. Special CH. PC Setup G G PC PIP (H-position) G G (V-position) G Clock G Phase G Auto configure G Reset G FG 0 FG Move G Next Move G Next F Back q Each press of channel (D, E) buttons sequences through the menu options shown below. 2 Press the volume (G) and then use the channel (D, E) buttons to select the PC option. H-position V-position Reset Clock Auto configure Phase 206-3922 25 CONNECTIONS PC Mode Adjustments (L15V36 Only) 4 Press the volume (G) and then use the volume (F, G) buttons to make appropriate adjustments. PC Setup H-Position V-Position Clock Phase Auto configure Reset FG G G G G G G 0 Adjust A Back q q q q q H-Position/V-Position : Adjusts picture left/right and up/down. The adjustment ranges are -100~+100 / -30~+30. Clock : Minimizes any vertical bars or stripes appearing on the screen background. Phase : Allows you to remove any horizontal noise and clear up or sharpen the character images. Auto-configure : Automatically adjusts the screen position, clock and clock phase. (The displayed image will disappear for a few seconds while Auto-configuration is in progress. ) Reset : Returns to the default settings programmed at the factory; default settings cannot be changed. 5 Press the exit button to save. - Some signals from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and clock phase manually. [. . . ] Rinse the cloth and wipe the cabinet again. Let the cabinet air-dry before turning your TV on. Extended Absence If you expect to leave your TV unused for a long time (such as a vacation), unplug the power cord from the wall power outlet to protect against possible damage from lightning or power surges. If you use an antenna, you may also want to disconnect it from the back of your TV before leaving. 206-3922 57 INFORMATION Product Specifications Model L15V36 L20V36 Horizontal size (Inches) Height (Inches) Thickness (Inches) Weight (pounds) 18. 3 14. 8 6. 7 13. 9 22. 8 18. 3 8 21. 6 Power requirements Television system Television channels DC 12V/4. 5A NTSC VHF : 2 ~ 13, UHF : 14 ~ 69 Cable : 01 ~ 125 LCD Panel 75 50 W 3W+3W DC 15V/4. 5A Television Screen External antenna impedance Power consumption Audio output Adapter (DC power) 70 W 5W+5W In : AC 100-240V ~ 1. 5A-0. 6A In: AC 100-240V ~ 1. 5A-0. 6A In: AC 100-240V ~ 1. 6A-0. 7A 50/60Hz, 115~180VA 50/60Hz 50/60Hz Out : DC 12V, 5A Out: DC 12V, 5A Out: DC 15V, 4. 5A For use only with Model No. SAD6012SE AC Adapter, manufactured by H & E co. , Ltd. [. . . ]