User manual ZENITH LSS-3200A

[. . . ] DIRECTV® HD Receiver OWNER'S MANUAL MODEL : LSS-3200A Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. SAFETY WARNING CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRONIC SHOCK DO NOT REMOVE COVER (OR BACK). REFER TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a bookcase or similar unit. [. . . ] Select the DIRECTV® menu by pressing " " on the remote control. Scroll down to the Mail List menu using "E". Move the highlight to the right with "G" to select a mail item from the list. Press " " and the full text of the mail will be displayed in the pop-up dialogue box. Select "Delete" on the pop-up box if you want to delete it. Press "F" to return to the previous level or press the EXIT button on the remote control if you want to return to TV viewing. NOTE The Message icon will be displayed in the Channel Banner only when at least one unread message is in the mail list. 66 8. Setting a Timer/Record Event Allows you to set up a timer or record event manually. You can see the event list in the Timer/Record List menu (DIRECTV Timer/Record List). You can also set a one time Timer/Record event in the Guide (see section 7-6). A Timer event will automatically tune to the selected channel at the selected time. A Record event will also turn on the DIRECTV® HD Receiver if it is turned off and will automatically control your VCR to record the program if the VCR Controller is correctly set up (see sections 3-6 and 8-23). To add a program to the Timer/Record List : 1. Press the MENU button on the Remote Control to display the on-screen menu. Select the DIRECTV menu by pressing " " on the remote control. Scroll down to the Timer/Record menu using "E". The pop-up dialogue box will be displayed. Select a Type option, either Timer or Record. Then select a Channel, Date, Time, Duration and Repeat options. Pressing " " will show the confirm dialogue box. After adding a program, you can check the new item in the Timer/Record List (see next page `8-6. Press MENU button to return to the previous level or press the EXIT button on the remote control if you want to return to TV viewing. 67 8-6. Modifying a Timer/Record Event The Timer/Record List shows the programs you have reserved in the Guide menu or in the Timer/Record menu. [. . . ] Although Dolby Digital can support up to 5. 1 channels, some broadcasts may only be available in stereo. - Confirm that the IR Controller is located near the Remote Control Sensor (see section 4-1 item 4) in accordance with your DVR Manual. - For the most reliable control, connect to your PVR/DVR using the Data Port connection (see section 3-2). - Please confirm Lock has been enabled with your preferred limits (see section 8-19). [. . . ]