User manual ZENITH MBC100

[. . . ] These buttons will control the VCR when TV or VCR is the active component. ENTER Shows Channel/Time display. Press after channel numbers for fast selection. QUIT/ PAUSE Removes on-screen display from view. If no display is on, switches audio mode on some TVs. rew MBR 3300 Series Remote "Big Button Remote" ZENITH REMOTE MANUAL 2 MBR3300/3400 REMOTES MBR UNIVERSAL REMOTE NOTE: Your MBR model remote may not look exactly like the one below, but all functions for the MBR models are similar. The descriptions below refer to using the remote with Zenith products, non-Zenith products may behave differently. FLASHBK (Flashback) Returns to previous Channel. [. . . ] A, B, C KEYS Special features of some TV's. Operates PIP functions on most TVs with PIP. "A" usually activates PIP, "B" usually controls the PIP channel or swaps the pictures, "C" usually "freezes" the PIP picture. Press repeatedly to set desired TV shut-off time. POWER Turns the active component on and off (see mode). PRG POWER CABLE SURF VCR FLASHBK AUX TV MUTE MODE Sets which audio/video component the remote will control. MUTE Turns sound off and on while picture remains. VOLUME (Left/Right) Increases TV's sound level. ENTER Shows Channel/Time, enters channel, or removes any on-screen menus. CHANNEL VOLUME CHANNEL VOLUME 1 4 7 0 MENU 2 5 8 3 6 9 ENTER QUIT QUIT/ (Three Functions Key) Exits from on-screen display, turns the sound enhancement feature on or off, and switches audio between Main source and PIP source. UP & DOWN ARROWS Moves highlighted bar within menu to select an option. CC Displays closed caption options menu. A B C CC RECORD PAUSE PLAY TIMER TV/VCR SOURCE REWIND STOP FFWD TV/VCR SOURCE Steps through source options. MEDIA CONTROLS Controls VCR, DVD, CD, TAPE, etc. These buttons control the VCR when TV or VCR is the active component. MBR 3400 Series Remote ZENITH REMOTE MANUAL 3 MBR3300/3400 REMOTES REMOTE PROGRAMMING PROGRAMMING INSTRUCTIONS If you're using Zenith products, the remote is already programmed for most common codes: TV = 101, VCR = 201, CABLE = 353, and AUX = 401. If the remote has been programmed for four components using the TV, VCR, CABLE and AUX keys, you may also program it for up to three additional using AUX+1, AUX+2 and AUX+3. Locate three-digit code for product in code table. Press and hold PRG until indicator lights up. Press the AUX and 1 simultaneously to select AUX+1. Enter a three-digit code, then press ENTER. The indicator light should flash, then turn off to indicate code is accepted. If the light stays on, repeat steps 3 and 4 or try a different code. Write the codes on the label inside battery compartment for future reference. Hold down AUX and press 1, 2, or 3 access AUX+1. +2 or +3 mode. AUTO FIND If none of the codes in the code table operate your equipment, use Auto Find to search for the proper code. Turn on the product you want to operate. [. . . ] Press the key to be programmed (CATV, VCR, AUX, or TV). Enter "000", then press ENTER within two seconds. Auto Find is active after the indicator light flashes and remains lit. Press and release POWER repeatedly, about once a second, until your product turns Off. [. . . ]