User manual ZENITH MBR4275

[. . . ] 6 More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Published by Technical Publications Zenith Electronics Corporation 201 James Record Road - Huntsville, Alabama 35824-1513 Copyright June 2000 by Zenith Electronics Corporation REMOTES ZEN UNIVERSAL REMOTE CONTROL NOTE: Your ZEN model remote may not look exactly like the one below, but all functions for the ZEN models are similar. The descriptions below refer to using the remote with Zenith products, non-Zenith products may behave differently. INDICATOR LIGHT Lights when buttons are pressed. CODE SEARCH Used to program the remote or to search through codes. [. . . ] Press and release the TV button (the Indicator Light will blink and then remain lit). Find the three digit code for your TV in the code list in this booklet and enter it using the Number Buttons. After your code is entered, the Indicator will turn off. Note: If the LED blinked rapidly when you entered the code, you may have entered an invalid code. Now check to see if the correct code was entered. With your TV on, press some of the buttons. If the TV responds correctly to each of the buttons, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes or our brand. Write down the code for future reference. Press and hold the CODE SEARCH button until the Indicator Light lights, then release the CODE SEARCH button. Press and release the VCR button (the Indicator Light will blink and then remain lit). Press and hold the CODE SEARCH button until the Indicator Light lights, then release the CODE SEARCH button. Press and release the AUX button (the Indicator Light will blink and then remain lit). Find the three digit code for your device in the code list and enter it using the Number Buttons. After your code is entered, the Indicator will turn off. Note: If the LED blinked rapidly when you entered the code, you may have entered an invalid code. Now check to see if the correct code was entered. With your device on, press some of the buttons. If the device responds correctly to each of the buttons, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes or our brand. Write down the code for future reference. Repeat these steps for the other AUX buttons. [. . . ] When the Indicator Light blinks off and on once, that number is the first stored digit. To find the third digit, repeat step four. This time the Indicator Light will remain off once the key corresponding to the third digit is pressed. Write down the code for future reference. ZENITH REMOTE MANUAL 4 ZEN SERIES ZEN REMOTE PROGRAMMING REMOTES WITH NO CODE SEARCH BUTTON The ZEN300 model remote has no CODE SEARCH button. [. . . ]