User manual ZENITH MU-42PZ90

[. . . ] PLASMA MONITOR OWNER'S MANUAL MODELS : MU-42PZ44/44M/44V MU-42PZ44A/44MA/44VA MU-42PZ44B/44MB/44VB MU-42PZ44K/44MK/44VK MU-42PZ44R/44MR/44VR MU-42PZ44S/44MS/44VS MU-42PZ90/90M/90V MU-42PZ90A/90MA/90VA MU-42PZ90B/90MB/90VB MU-42PZ90K/90MK/90VK MU-42PZ90R/90MR/90VR MU-42PZ90S/90MS/90VS MU-42PZ90C Please read this owner's manual carefully before operating the Monitor. Record model number and serial number of the Monitor. See the label attached on the back of the Monitor and quote this information to your dealer when you require service. Model number : Serial number : P/NO : 3828VA0361H d (RF03GA) LG Electronics U. S. A. , Inc. Warning Warning WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). [. . . ] button to set the minutes. -- : -- 5. Press the ENTER button to save. MENU Prev. On/Of f Timers Setup - Timer functions operate only if current time has been set. - Off-Timer function overrides On-Timer function if they are set to the same time. - The monitor must be in standby mode for the On-Timer to work. Press the G D /E button to select the TIMER menu. TIMER Clock Off timer On timer Auto off G button and then use D /E button to select Off timer or On timer. 3. Press the G button and then use D / E button to select On. · To cancel On/Off timer function, select Off. 30 button and then use button and then use D /E D /E button to set the hour. For only On timer function; Press the sound level. Press the ENTER button to save. button and then use D /E button to set MENU Prev. Auto Of f - If there is no input signal, the Monitor will turn off automatically after 10 minutes. Press the G button and then use D /E D /E D /E TIMER Clock Off timer On timer Auto off G button to select the TIMER menu. button to select Auto off. button to select On or Off. On Off 4. Press the ENTER button to save. MENU Prev. Sleep Timer - The Sleep Timer turns the Monitor off at the preset time. Note that this setting is cleared when the monitor is turned off. Press the SLEEP button repeatedly to select the number of minutes. First the screen, followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes. When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to count down from the number of minutes selected. To check the remaining minutes before the monitor turns off, press the SLEEP or ENTER button once. To cancel the Sleep Timer, press the SLEEP button repeatedly until zz zz --- Min option appears on the --- Min appears. 18 Plasma Display Special Menu Options Key Lock - The monitor can be set up so that it can only be used with the remote control. - This feature can be used to prevent unauthorized viewing by disabling the front panel controls. - This Monitor is programmed to remember which option it was last set to even if you turn the monitor off. [. . . ] Transmission [j][t][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 · Refer to `Real data mapping 1'. Acknowledgement [t][ ][Set ID][ ][OK][Data][x] 27. ISM Method (Command2:p) G To avoid having a fixed image remain on screen. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 0: Normal 1: White wash Acknowledgement [p][ ][Set ID][ ][OK][Data][x] 2: Orbiter 3: Inversion G To adjust picture position and minimize image shaking automatically. [. . . ]