User manual ZENITH MU-50PZ44S

[. . . ] PLASMA MONITOR OWNER'S MANUAL MODELS : MU-50PZ44/44M/44V MU-50PZ44A/44MA/44VA MU-50PZ44B/44MB/44VB MU-50PZ44K/44MK/44VK MU-50PZ44R/44MR/44VR MU-50PZ44S/44MS/44VS MU-50PZ90/90M/90V MU-50PZ90A/90MA/90VA MU-50PZ90B/90MB/90VB MU-50PZ90K/90MK/90VK MU-50PZ90R/90MR/90VR MU-50PZ90S/90MS/90VS Please read this owner's manual thoroughly before operating the Monitor. Record model number and serial number of the Monitor. See the label attached on the back of the Monitor and relate this information to your dealer if you ever require service. Model Number : Serial Number : P/NO : 3828VA0410A b (RF03GB) Warning Warning WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). [. . . ] Press the OK button to save. MENU Prev. On/Off Timer Setup On/Off - Timer function operates only if current time has been already set. - Off-Timer function overrides On-Timer function if they are set to the same time. Press the G D /E button to select the TIME menu. VIDEO AUDIO TIME SPECIAL Vol. SCREEN TWIN Clock Off timer On timer Auto off G button and then use D /E button to select Off timer or On timer. 3. Press the G button and then use D / E button to select On. · To cancel On/Off timer function, select Off. Press the G G On Off 12 00 30 button and then use button and then use D /E D /E button to set the hour. button to set the minutes. G MENU Prev. 6. For only On timer function; Press the volume level. Press the OK button to save. button and then use D /E button to set Auto Off Off - If there is no input signal, the Monitor turns off automatically after 10 minutes. Press the OK button to save. D /E D /E D /E button to select the TIME menu. VIDEO AUDIO TIME SPECIAL SCREEN TWIN Clock Off timer On timer Auto off G button to select Auto off. button to select On or Off. On Off MENU Prev. Sleep Timer - The sleep timer turns the Monitor off at a preset time. Note that this setting is cleared when the monitor is turned off. Press the SLEEP button repeatedly to select the number of minutes. First the --- Min option appears on the screen, followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes. When the number of minutes you want is displayed on the screen, press the OK button. The timer begins to count down from the number of minutes selected. To check the remaining minutes before the monitor turns off, press the SLEEP or OK button once. To cancel the Sleep Timer, press the SLEEP button repeatedly until zz zz --- Min appears. 18 Plasma Monitor Operation Special Menu Options Key Lock - The monitor can be set up so that it can only be used with the remote control. - This feature can be used to prevent unauthorized viewing by disabling the front panel controls. - This Monitor is programmed to remember which option it was last set to even if you turn the monitor off. Press the G D /E button to select the SPECIAL menu. VIDEO AUDIO TIME SPECIAL Language Key lock ISM Method Low power Set ID. [. . . ] ISM Method (Command2:p) G To avoid having a fixed image remain on screen. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 0: Normal 1: White wash Acknowledgement [p][ ][Set ID][ ][OK][Data][x] 2: Orbiter 3: Inversion 32. Auto Configure (Command2:u) G To adjust picture position and minimize image shaking automatically. Auto Configure only works in RGB-PC mode. [. . . ]