User manual ZENITH P42W24B OPERATING GUIDE

[. . . ] Installation and Operating Guide Model Numbers | P42W24B | PLASMA DISPLAY PANEL © Copyright 2002, Zenith Electronics Corporation. WARNING WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. FCC NOTICE · A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Press the MENU button. D /E G ON OFF White Wash Wash - White Wash removes permanent images from the screen. - Set White Wash `ON' until fixed image disappears. To return to the viewing screen, set White Wash to `OFF'. - Note: An excessive permanent image may be impossible to clear entirely with White Wash. Press the G D /E button to select the SPECIAL menu. SPECIAL LANGUAGE KEY LOCK ORBITER WHITE WASH COLOR TEMP. SET ID button and then use D /E button to select WHITE WASH. 3. Press the G button and then use D / E button to select ON or OFF. · When you select ON, the screen changes to white. Press the MENU button. G ON OFF Key Lock - The monitor can be set up so that it can only be operated with the remote control. - This feature can be used to prevent unauthorized viewing. · Each press of the KEY LOCK button changes the screen display as shown below. ON OFF · You can also select ON or OFF in the SPECIAL menu. - This Monitor is programmed to remember which option it was last set to even if you turn the monitor off. - In KEY LOCK `ON', if the monitor is turned off with the remote control, press the INPUT SELECT button on the monitor or POWER, or INPUT SELECT on the remote control. - With the KEY LOCK ON, the display ` KEY LOCK' appears on the screen if any button on the front panel is pressed. 16 Adjusting Auto Color Control - To initialize values (reset to default settings), select the NORMAL option. - When adjusting color temperature options (red, green, or blue) manually, ACC automatically changes to USER. Press the G G G D /E button to select the SPECIAL menu. SPECIAL LANGUAGE KEY LOCK ORBITER WHITE WASH COLOR TEMP. SET ID button and then use D /E /E /E button to select COLOR TEMP . button to select the desired color temperature. button and then use D button and then use D D /E G TO SET · Each press of NORMAL button changes the menu option as shown. COOL WARM USER COLOR TEMP · Color temperature options NORMAL, COOL and WARM are preset at the factory and cannot be changed. ACC RED GREEN BLUE G NORMAL COOL WARM USER Manual Color Temperature Control (User option) - You can adjust red, green, or blue to any color temperature you prefer. SPECIAL 1. Use the G G D /E button to select the SPECIAL menu. LANGUAGE KEY LOCK ORBITER WHITE WASH COLOR TEMP. SET ID button and then use D /E /E button to select COLOR TEMP . button to select a color. button and then use D G TO SET F /G button to make appropriate adjustments. 5. · The adjustment range of RED, GREEN, and BLUE is -10 ~ +10. Sleep Timer - Sleep timer turns the Monitor off at the preset time. [. . . ] Blue Adjustment (Command2:$) G To adjust blue in color temperature. Transmission [k][$][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 * Refer to `Real data mapping 2' as shown below. Acknowledgement [$][ ][Set ID][ ][OK][Data][x] 27. White Wash (Command2:q) * Real data mapping 2 0 : -10 5 : -9 A : -8 2D: -1 32: 0 37: +1 5F: +9 64: +10 G To control the white wash function on/off. [. . . ]