User manual ZENITH P50W26 OPERATING GUIDE

[. . . ] Installation and Operating Guide Model Numbers | P50W26, P50W26B | PLASMA DISPLAY PANEL © Copyright 2002, Zenith Electronics Corporation. WARNING WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. FCC NOTICE · P50W26: A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] 1. Press the DASP button to select the picture appearance setup. FLAT SPORTS CINEMA MUSIC USER · You can also select FLAT, SPORTS, CINEMA, MUSIC, or USER in the AUDIO menu. AVL (Auto Volume Leveler) Volume - This feature maintains an equal volume level; even if you change channels. Press the G G D /E button to select the AUDIO menu. VIDEO AUDIO TIME SPECIAL DASP AVL TREBLE BASS BALANCE 50 50 0 G button and then use button and then use D /E D /E button to select A VL. button to select ON or OFF. ON OFF 4. Press the MENU button. SCREEN TWIN MENU PREV. Adjusting Sound (Manual Setting) 1. Press the MENU button and then use D 2. Press the G D /E F /G /E button to select the AUDIO menu. VIDEO AUDIO TIME DASP AVL TREBLE BASS BALANCE 50 50 0 G button to select the desired sound item. button to make appropriate adjustments. button and then use SPECIAL 4. Press the MENU button. SCREEN TWIN MENU PREV. 15 Time Menu Options Setting the Clock - If current time setting is erased by a power failure, if TV is unplugged or if the monitor is turned off with the ON/OFF button on the monitor, reset the clock. Press the G G G D /E button to select the TIME menu. VIDEO AUDIO TIME CLOCK OFF TIMER ON TIMER AUTO OFF G button and then use button and then use button and then use D /E D /E D /E button to select CLOCK. button to set the hour. SPECIAL button to set the minutes. SCREEN TWIN 5. Press the MENU button. MENU PREV. Setting the On/Off Timer On/Off - Timer function operates only if current time has been already set. - Off-Timer function overrides On-Timer function if they are set to the same time. - The monitor must be in standby mode for the On Timer to work. Press the G G G G D /E button to select the TIME menu. VIDEO AUDIO TIME SPECIAL VOL SCREEN TWIN CLOCK OFF TIMER ON TIMER AUTO OFF G button and then use button and then use button and then use button and then use D /E D /E D /E D /E button to select OFF TIMER/ON TIMER. button to set the minutes. G OFF ON 12 00 30 6. For only ON TIMER function; Press the volume level. Press the MENU button. button and then use D /E button to set MENU PREV. - To cancel ON/OFF TIMER function Press the D / E button to select OFF in step 3. Auto Off Off - If there is no input signal, the Monitor turns off automatically after 10 minutes. Press the MENU button. D /E D /E D /E button to select the TIME menu. VIDEO AUDIO TIME SPECIAL SCREEN TWIN CLOCK OFF TIMER ON TIMER AUTO OFF G button to select AUTO OFF. button to select ON or OFF. OFF ON MENU PREV. Sleep Timer - Sleep timer turns the Monitor off at the preset time. zz - Press the SLEEP button to select the number of minutes. The display --- MIN will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240. The timer begins to count down from the number of minutes selected. [. . . ] Transmission [k][$][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 * Refer to `Real data mapping 2'. Acknowledgement [$][ ][Set ID][ ][OK][Data][x] Data Min : 0 ~ Max : 64 28. Orbiter Pixel Setting (Command:s) G To adjust pixel number in orbiter function. Transmission [j][s][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 9 * Refer to `Real data mapping1'. [. . . ]