User manual ZENITH PRO900X OPERATING GUIDE

[. . . ] PresentationTM Series HD Projection Display Operating Guide and Warranty for User Model PRO900X ® PresentationTM is a registered trademark of Zenith Electronics Corporation RECORD YOUR MODEL NUMBER (Now, while you can see it) The model and serial number of your new HD Display are located on the cabinet. For your future convenience, we suggest that your record these numbers here: MODEL NO. ____________________________________ SERIAL NO. ____________________________________ WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] 521 AUDIO TUNER AND AMPLIFIERS Carver . 460 461 498 501 502 504 505 206-3275-A PAGE 17 TRK4000PT TRACKBALL REMOTE CONTROL Remote key functions in other operating modes TV Mode KEY NAME MODE LEFT/RIGHT POWER SURF FLSHBK MUTE CHANNEL UP CHANNEL DOWN VOLUME (RIGHT) VOLUME (LEFT) TRAKBALL (PUSH) TRAKBALL (MOVE) 1 2 3 4 5 6 7 8 9 0 PIP (Snapshot) ENTER MENU UP ARROW DOWN ARROW LEFT ARROW RIGHT ARROW QUIT SOURCE RECORD PAUSE REWIND PLAY STOP FFWD Zenith Code 101 Changes mode TV Power On/Off Surf On/Off TV Flashback, AM/PM TV Mute TV Channel Up TV Channel Down TV Volume Up TV Volume Down Trackball Push Trackball Move TV Digit 1 TV Digit 2 TV Digit 3 TV Digit 4 TV Digit 5 TV Digit 6 TV Digit 7 TV Digit 8 TV Digit 9 TV Digit 0 PIP Freeze/On/Off TV Enter TV Menu TV Select Up TV Select Down TV Adjust Left TV Adjust Right TV Quit/Front Surround TV Sources VCR Record VCR Pause VCR Rewind VCR Play VCR Stop VCR Fast Forward VCR Mode Zenith Code 201 Changes Mode VCR Power On/Off VCR AM/PM VCR Flashback TV Mute VCR Channel Up VCR Channel Down TV Volume Up TV Volume Down Trackball Push Trackball Move VCR Digit 1 VCR Digit 2 VCR Digit 3 VCR Digit 4 VCR Digit 5 VCR Digit 6 VCR Digit 7 VCR Digit 8 VCR Digit 9 VCR Digit 0 VCR VCR Plus+ VCR Enter VCR Menu VCR Select Up VCR Select Down VCR Adjust Left VCR Adjust Right VCR Quit TV Tuner or VCR Tuner VCR Record VCR Pause VCR Rewind VCR Play VCR Stop VCR Fast Forward Cable Box Mode Zenith Code 353 Changes Mode Cable Box Power On/Off Cable FC/Fav Ch Cable Flashback TV Mute Cable Channel Up Cable Channel Down TV Volume Up TV Volume Down Trackball Push Trackball Move Cable Digit 1 Cable Digit 2 Cable Digit 3 Cable Digit 4 Cable Digit 5 Cable Digit 6 Cable Digit 7 Cable Digit 8 Cable Digit 9 Cable Digit 0 Cable Guide Cable Enter Cable Menu Cable Up Arrow Cable Down Arrow Cable Left Arrow Cable Right Arrow Cable Quit Cable Info Cable Buy Cable Guide VCR Rewind VCR Play VCR Stop VCR Fast Forward AUX 1 Mode Zenith Code 521 (DVD Player) Changes Mode Aux Power On/Off AUX Audio AUX Frame/Time TV Mute AUX Skip >> AUX Skip << TV Volume Up TV Volume Down Trackball Push Trackball Move AUX Digit 1 AUX Digit 2 AUX Digit 3 AUX Digit 4 AUX Digit 5 AUX Digit 6 AUX Digit 7 AUX Digit 8 AUX Digit 9 AUX Digit 0 AUX Display AUX Enter AUX Menu AUX Up Arrow AUX Down Arrow AUX Left Arrow AUX Right Arrow AUX Clear AUX Setup AUX Edit AUX Pause AUX Rewind AUX Play AUX Stop AUX Ffwd AUX 2 Mode Zenith Code 384 (N/C Set-Top) Changes Mode N/C Power On/Off N/C TV/Net N/C Flashback N/C Mute N/C Channel Up N/C Channels Down N/C Volume Up N/C Volume Down Activate N/C Trackball N/C Trackball Move N/C Digit 1 N/C Digit 2 N/C Digit 3 N/C Digit 4 N/C Digit 5 N/C Digit 6 N/C Digit 7 N/C Digit 8 N/C Digit 9 N/C Digit 0 N/C Info N/C Enter N/C Menu Bar N/C Page Up N/C Page Down N/C Back N/C Forward N/C TV Bar N/C Clear N/C Guide N/C Mail N/C History N/C Home N/C Help N/C Search References: 124-219 and up 221-1282 PAGE 18 206-3275-A TRK4000PT TRACKBALL REMOTE CONTROL Control the volume on your sound amplifier while in other modes AMPLIFIER VOLUME OVERRIDE 1. Find the code that operates your amplifier. Test it to make sure it's the correct one by following the procedure in "Programming Your Remote" on page 14. Press and hold MUTE and FLSHBK on your remote until the indicator light stays lit. Press MODE Left/Right until the indicator light is under the mode that you want Amplifier Volume to appear, for example, TV. v ol po tv we r aux 2 vcr cable aux 1 3 mode 2 mu te surf flsh bk el 4. Enter the special code: 4-9-9, then quickly press ENTER. (The indicator should blink and then turn off. ) e CABLE VOLUME OVERRIDE 1. Find the code that operates your cable box. Test it to make sure it's the correct one by following the procedure on "Programming Your Remote" on page 14. Press and hold MUTE and FLSHBK on your remote until the indicator light stays lit. Press MODE Left/Right until the indicator light is under the same mode that you chose in step one. 1 2 5 8 0 pip 4 4 7 source enter menu record quit/ pause play 4. Enter the special code: 3-9-9, then quickly press ENTER. (The indicator light should blink and then turn off. ) The VOLUME and MUTE keys now control the cable box. Notes: · Your volume and mute keys now control your amplifier. To change everything back to factory settings, reprogram all keys with their original codes. See "Programming Your Remote, " on page 14. · If you can't find the code for your amplifier, use the Auto Find feature. rew stop ffwd ha c 6 9 nn um 3 206-3275-A PAGE 19 TRK4000PT TRACKBALL REMOTE CONTROL AutoFind: Automatically searches all possible brand programming codes 1. Press and hold the MUTE and FLSHBK keys until the indicator light turns on. Press MODE Left/Right until the indicator lights underneath the device you're trying to program; TV, VCR, Cable Box, Aux 1, Aux 2). With the NUMBER keypad, enter the code 0-0-0 (zero-zero-zero), then press ENTER right away. mu tv po vcr we r aux 2 cable aux 1 5/7 3 mode 2 te 5. Aim the remote at the correct device and press POWER. Allow a second to pass, then press POWER again. [. . . ] Such replacement parts are warranted for the remaining portion of the original warranty period. Whenever possible, warranty service will be provided where the HD Display is installed in the U. S. A. (Some repairs may require the HD Display to be taken by the servicer to the repair facility and returned, at no additional charge. ) This warranty covers manufacturing defects and does not cover installation, adjustment of controls, or repair of home systems, cable converters or cable company-supplied equipment: it does not cover damage due to misuse, abuse, negligence, acts of God, or causes beyond the control of Zenith. Any alteration of the product after manufacture voids this warranty in its entirety. [. . . ]