User manual ZENITH RD-JT91

[. . . ] Please read this manual carefully before operating your set. Record model number and serial number of the set. See the label attached on the bottom of the set and quote this information to your dealer when you require service. Model number Serial number : : LG DLP PROJECTOR RD-JT91 OWNER'S MANUAL DLP PROJECTOR FCC NOTICE · A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Connect the AV input jacks of the projector to the output jacks of the A/V source with A/V cables. If you connect the Audio(R) of external equipment with projector, you can't hear the sound. The video cable is yellow and the left audio is white and right audio is red. <VCR> S VIDEO (R) AUDIO (L) OUT IN VIDEO < How to connect 2 > b. Connect the S-Video input jack of the projector to the S-Video output jack of an A/V source with an S-Video cable. Connect the Audio input jacks of the projector to the output jacks of the A/V source with an Audio cable. * You can get better picture quality when connecting SVideo source to the projector. Connecting to a DVD * The output jacks (Y, PB, PR) of the DVD might be labelled as Y, Pb, Pr / Y, B-Y, R-Y / Y, Cb, Cr according to the equipment. < How to connect > a. Connect RCA to D-Sub Cable to RGB Input (PC/DTV) of the projector. * When connecting the DVD, match the jack colors with the DVD. (Y=green, PB=blue, PR=red) b. Connect the Audio port of the projector to the Audio output port (L) of the DVD. Use a DVD with Component 480i(576i)/480p(576p) mode. (R) AUDIO (L) Y PB PR <DVD> Connecting to a D-TV Set-Top Box * To receive D-TV programmes, it is necessary to purchase a D-TV receiver (Set-Top Box) and connect it to the projector. * Please refer to the owner's manual of the D-TV Set-Top Box for the connection between projector and D-TV Set-Top Box. * Use a D-TV receiver with DTV 720p/1080i mode. < How to connect an RGB source > a. Connect computer cable to RGB Input (PC/DTV) of the projector. * If the Set-Top Box has DVI output, use DVI cable. <D-TV Set-Top Box> (R) AUDIO (L) b. Use a DTV receiver with DTV 480p(576p)/720p/1080i mode. * It can be supported the DVI/HDCP. DTV OUTPUT DVI OUTPUT Y PB PR < How to connect a Component source > a. Connect RCA to D-Sub Cable to RGB Input (PC/DTV) of the projector. * When connecting the D-TV Set-Top Box, match the jack colors with the D-TV Set-Top Box. (Y=green, PB=blue, PR=red) (R) AUDIO (L) DTV OUTPUT DVI OUTPUT Y PB PR b. Connect the Audio port of the projector to the Audio output port (L) of the D-TV Set-Top Box. Use a DTV receiver with DTV 480p(576p)/720p/1080i mode. 18 Function Function * In this manual, the OSD(On Screen Display) may be different from your Projector's because it is just example to help with the Projector operation. * If there is no input signal present, the Menu will not be displayed on the screen. * This operating guide explains operation of RGB(PC) mode mainly. Video Menu Options Adjusting Video 1. Press the MENU button and then use F, G button to select the menu. Contrast 50 50 50 50 50 Brightness Color R Color G Color B Reset < RGB mode > 2. Press the OK (A) button and then use D , E button to select a video item you want to adjust. Press the F, G button to adjust the screen condition as you want. G MENU prev. move F G adjust G G G Each adjustment of menu options will not affect other input source. [. . . ] Press the G menu. Clock Phase Horizontal Vertical MENU prev. 0 15 0 0 move F G adjust D, E button to select Clock or F, G button to adjust the screen condition. To exit the menu display, repeatedly, press the MENU button. Screen Position *If the image size does not fit the screen in accordance with the input source, set the position of the image by selecting Horizontal / Vertical position. Press the MENU button and then use F, G button to select the menu. Clock Phase Horizontal Vertical MENU prev. 0 15 0 0 move F G adjust 2. Press the OK (A) button and then use D , E button to select Horizontal or Vertical item. Press the F, G button to adjust the screen condition as you want. G G G Horizontal, Vertical are adjusted from -50 to +50. Based on the input mode, the adjustment range may be changed. [. . . ]