User manual ZENITH RL-JA20

[. . . ] Please read this manual carefully before operating your set. Record model number and serial number of the set. See the label attached on the bottom of the set and quote this information to your dealer when you require service. Model number Serial number : : LG LCD PROJECTOR RL-JA20 OWNER'S MANUAL R LCD PROJECTOR Warning This is a class B product. [. . . ] q To exit the menu display, press the MENU button. 44 Flip Vertical Function * This function reverses the projected image vertically. * When you hang the projector upside down from the ceiling , you will need to reverse the image vertically and horizontally. 1 Press the MENU button and then use D / E button to select the menu. Language ARC Flip Horizontal Flip Vertical English 16:9 Menu exit move OK English Language ARC 16:9 Flip Horizontal Press OK to Flip Flip Vertical Menu prev move OK 3 Press the OK(A) button to see reversed image. q Each time you press the button, the image will be reversed. q To exit the menu display, press the MENU button. 45 SPECIAL FUNCTIONS 2 Press the OK (A) button and then use D / E button to select [Flip Horizontal] item. Twin Picture function TITLE How to use twin picture TWIN PICTURE Press the TWIN PICTURE button to select desired with picture. Twin Picture1 Twin Picture 2 Twin Picture : Off Twin Picture 1 Twin Picture 2 Twin Picture : Off q You can use this function by using the MENU button. Input select of the sub picture Press the SUB INPUT button to select the input source of sub picture. SUB INPUT select OK F A-RGB1 G 46 Changing the picture of main and sub picture Press the SWAP button in twin picture mode. SWAP A-RGB2 Video Video A-RGB2 Using Still function in twin picture mode. STILL Press the STILL button in twin picture mode. Main Still Sub Still exit Off Off select q You can cancel this function directly by selecting [Off] in menu. q The STILL function is cancelled when changing the input signal. [Main Still] is cancelled when changing the input signal with INPUT SELECT button and [Sub Still] is cancelled when changing the input signal with SUB INPUT button. That is, [Main/Sub Still] work separately. q The STILL function would release automatically after about 10 minutes. 47 SPECIAL FUNCTIONS Adjusting screen display * If the image size does not fit the screen in accordance with the input source, set the position of the image by selecting Horizontal / Vertical position. (For A-RGB1, A-RGB2, Component 480p/720p/1080i) 1 Press the MENU button and then use D / E button to select the menu. Auto Tracking Clock 25 Phase 25 Horizontal 0 Vertical 0 Menu exit move OK 2 Press the OK (A) button and then use D / E button to select [Horizontal] or [Vertical] item. Auto Tracking Clock 25 Phase 25 Horizontal 0 Vertical 0 Menu prev. move adjust 3 Press the VOLUME (F, G) button to adjust the screen condition as you want. q [Horizontal], [Vertical] are adjusted from -50 to +50. q To exit the menu display, press the MENU button. 48 Using Keystone function * Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape. * Only use the Keystone function when you can't get the best angle of projection, because it may cause a blazing fire of the screen. 1 Press the KEYSTONE button. V Keystone 0 H Keystone 0 exit adjust 2 Press the D / E button to select [V Keystone] or [H Keystone] item. POSITIONING 3 Press the VOLUME (F, G) button to adjust the screen condition as you want. q [Keystone] are adjusted from -50 to +50. q Adjustment range of H/V Keystone may not work until -50 ~ +50 because they are interlocked. q Based on the input resolution or twin picture mode, the adjustment range of Keystone may be different. q To exit the menu display, press the OK (A) button. q You can also use this function by using the MENU button. 49 Using Zoom function * This function works only in RGB mode. 1 Press the ZOOM - or ZOOM + button. 0/20 ZOOM- ZOOM+ 2 Press the ZOOM - or ZOOM + button to adjust the zoom level. 15/20 20/20 ZOOM- ZOOM+ ZOOM- ZOOM+ 3 4 Move to the position you want to see the enlarged screen by moving press the VOLUME (F, G) , D, E button. Press the OK (A) or ARC button to exit the zoom function. R * This function doesn't work in Video, S-Video, Component mode. * You can use this function by using the MENU button. * In the zoom mode, you can adjust horizontal / vertical position with the VOLUME (F, G) , D, E button during displaying zoom OSD. 50 Using ARC function * You can select 16:9 picture format only with an HD input (720p, 1080i) mode. 1 Press the ARC button. Each press of the button changes the display as below. < A-RGB1/A-RGB2/D-RGB mode > ARC F 16:9 G ARC F 4:3 G 16:9 4:3 < Video/S-Video/Component(480i(576i), 480p) mode > ARC F 16:9 G ARC F 4:3 G 16:9 4:3 22% Magnification ARC F 17% Magnification Zoom1 G ARC F Zoom4 G Zoom1 22% Magnification Zoom4 22% Magnification ARC F 17% Magnification ARC F Zoom3 G Zoom2 G Zoom3 17% Magnification Zoom2 * Zoom1 Select to stretch the normal image vertically (about 17% ). Part of the top and bottom of the image will not be visible and black bars may appear at top and bottom of screen for some input sources. * Zoom2 Select to stretch the normal picture both vertically and horizontally (about 17% ) to provide an enlarged and distortion free image. * Zoom3 Select to stretch the normal picture vertically (about 22% of original picture format). * Zoom4 Select to stretch the normal picture both vertically and horizontally (about 22% ) to provide an enlarged and distortion free image. * You can also use this function by using the MENU button. R 51 POSITIONING Adjusting Video 1 Press the MENU button and move the D / E button up or down to select each < RGB mode > Contrast Brightness Color R Color G Color B Reset Menu exit menu. < Video, S-Video, Component mode > APC Contrast Brightness Color Sharpness Tint OK Menu exit User < Twin picture mode > Contrast Brightness Reset 50 50 50 50 50 50 50 50 50 50 50 0 move OK move Menu exit move OK 2 Press the OK (A) button. < RGB mode > Contrast Brightness Color R Color G Color B Reset Menu Prev. < Video, S-Video, Component mode > APC Contrast Brightness Color Sharpness Tint adjust Menu Prev. User < Twin picture mode > Contrast Brightness Reset 50 50 50 50 50 50 50 50 50 50 50 0 move select move Menu Prev. move adjust 3 4 Press the D / E button up or down to select a video item you want to adjust. Press the VOLUME (F, G) button to adjust the selected video item as you want. q You can only adjust [Contrast] and [Brightness] of menu in Twin picture mode. In Twin picture mode, adjustment for [Contrast] and [Brightness] will not affect other input sources. Adjustments apply to main and sub picture simultaneously. q Each adjustment of menu options will not affect other input source. [. . . ] WARRANTY PERIOD: LABOR: Two Years from the Date of Purchase. Your unit will be repaired or replaced with a new, substitute model or factory reconditioned unit, at the manufacturer's option. If repaired, parts used in the repair may be new or remanufactured. Parts, excluding Projector Lamp: Two Years from the Date of Purchase. [. . . ]