User manual ZENITH Z42PX1D OPERATING GUIDE

[. . . ] Installation and Operating Guide | Warranty Model Numbers | Z42PX1D / Z50PX2D | PLASMA TV © Copyright 2005, LG Electronics USA, Inc. Warning/Caution Warning/Caution WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING/CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. FCC NOTICE · A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Press the G button and then use D button to select the TIME menu. /E button to select Off Timer or On Timer. 3. Press the G button and then use D / E button to select On. · To cancel On/Off timer function, select Off. Press the G G button and then use button and then use D /E D /E button to set the hour. button to select the channel at turn-on. button to set the sound level at turn-on. 6. For only On timer function Press the G button and then use D Press the G button and then use D /E /E 7. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. 30 Plasma TV Operation Sleep Timer - The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. - You can also set up the Sleep Timer in the TIME menu. Press the TIMER button repeatedly to select the number of minutes. When the Off option appears on the screen, highlight one of the following sleep timer options by using the navigation : 10, 20, 30, 60, 90, 120, 180, and 240 minutes. When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to count down from the number of minutes selected. To check the remaining minutes before the TV turns off, press the TIMER button once. To cancel the Sleep Timer, press the TIMER button repeatedly to select Off. Auto Off Off - If set to on and there is no input signal, the TV turns off automatically after 10 minutes. Press the MENU button and then use D / E button to select the TIME menu. Press the G button and then use D / E button to select Auto Off. Press the G button and then use D /E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Operating Guide 31 Operation Option Menu Features Aspect Ratio Control 0- Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. - If you are viewing a picture with a 16:9 aspect ratio, you can't use the Horizon aspect ratio option. [. . . ] Your unit will be repaired or replaced with a new, substitute model or factory reconditioned unit, at Zenith's option. If repaired, parts used in the repair may be new or remanufactured. Visit our website at http://www. zenithservice. com G G G G G G damage caused in shipping or transit service required as a result of improper installation, including incorrect or insufficient AC supply (please consult the owner's manual for power supply requirements) installation or repair of antenna systems, cable converters, cable company supplied equipment, or other components in a video system set-up or adjustment on consumer controls, or damage caused by improper adjustments damage caused by other system components any unit that has been modified or incorporated into any other product replacement of batteries on the remote control. damage (including cosmetic damage), failure, loss G G G G G or personal injury due to misuse, abuse, negligence, improper maintenance or storage, or to acts of nature or other causes beyond Zenith's control. [. . . ]