User manual ZENITH ZEN525 OPERATING GUIDE

[. . . ] REMOTE MANUAL Product Type: Model Line: Product Year: Manual Part #: Universal IR Remote ZEN100-700 (all) 1999/2000 Electronic Version Only Models: All ZEN Model Remotes ZEN100 ZEN300 ZEN350 ZEN400 ZEN425 ZEN450 ZEN525 ZEN700 ZEN725 ZENDTV NOTE: This manual was designed to help you program your Zenith Remote Control. If you need the complete Operating Guide for your Zenith Product, please contact Zenith National Parts Sales at 888-3-ZENITH (888-3936484, Mon-Fri 7-8 CST, Sat 8-5 CST). CONTENTS Remote Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Programming Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Programming Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Find the three digit code for your VCR in the code list and enter it using the Number Buttons. After your code is entered, the Indicator will turn off. Note: If the LED blinked rapidly when you entered the code, you may have entered an invalid code. Now check to see if the correct code was entered. With your TV on, press some of the buttons. If the VCR responds correctly to each of the buttons, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand. Write down the code for future reference. Note: The REC button must be pressed TWICE to record from your VCR. For Zenith brand VCRs, press the REC button once, then press it again for three seconds. ZENITH REMOTE MANUAL 3 ZEN SERIES ZEN REMOTE PROGRAMMING PROGRAMMING CABLE BOXES 1. Press and hold the CODE SEARCH button until the Indicator Li ght lights, then release the CODE SE ARCH button. Press and release the CBL button (the Indicator Light will blink and then remain lit). Find the three digit code for your Cable box in the code list and enter it using the Number Buttons. After your code is entered, the Indicator will turn off. Note: If the LED blinked rapidly when you entered the code, you may have entered an invalid code. Now check to see if the correct code was entered. With your TV and Cable Box on, press some of the buttons. If the Cable Box responds correctly to each of the buttons, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes or our brand. Write down the code for future reference. PROGRAMMING AUX DEVICES Aux buttons allow you program a CD, second TV, satellite system or second VCR. Manually turn on the device you wish to program. [. . . ] Follow the instructions below to program it. Manually turn on the device you wish to program. Press and hold a mode button (TV, VCR, or CBL) until the Indicator Light lights, then release the mode button. Find the three digit code for your Cable box in the code list and enter it using the REW, PLAY, and F. F. [. . . ]