User manual ZIBRO S1735

[. . . ] S1731* - S1735* - S1753* 4 1 TR OPERATING MANUAL GEBRUIKSAANWIJZING KULLANIM KILAVUZU 2 22 42 Dear Sir, Madam, Congratulations on the purchase of your Zibro airconditioner. You have acquired a high quality product that, if used responsibly, will give you many years of pleasure. Please read these instructions for use first in order to ensure the maximum life span of your airconditioner. On behalf of the manufacturer, we provide a 24-month guarantee on all material and production defects. [. . . ] When the MODE is set at "AUTO", the fan speed changes automatically. WARNING! Do not place heating equipment right under the indoor unit and the remote controller. Adjust air flow direction to avoid the direct airflow hitting to the heating equipment. Provide adequate ventilation Cooling/heating/dry operation 1. 4. Press the ON/OFF button Set the operation mode to Cooling operation mode button Adjust the setting temperature by pressing the temperature setting buttons. Adjust the fan speed by pressing the fan speed button. When the mode is set at "AUTO" the fan speed changes automatically. 2. Press the ON/OFF button Press the ionizer button To stop negative ion operation, press the ionizer button. Air flow adjustment Horizontal adjustment (all models) When the ON/OFF button is pressed, the horizontal louver will move automatically. S1731* - S1735* S1753* 4 12 Swing of air flow (horizontallay) If the louver button is pressed once, the horizontal louver will move within the range of the figure above. Fixing the air flow Direction If the louver button switch is pressed again, the horizontal louver will be fixed and that position is memorized. From the next operation the louver will be set at previous position automatically. Vertical adjustment Swing of Air Flow (vertically) The vertical airflow can be adjusted by manually changing the vertical louver blades. For S1753* only: the vertical louver will keep moving steadily right and left if the vertical louverbutton is pressed once. Fixing the flow direction: For S1753* only: The horizontal louver will come to a halt if the vertical louver button is pressed once again. NOTE! When the operation is off, the horizontal louver closes the outlet automatically. Do not move the horizontal louver by hands. It may make the louver not to work correctly. In order to move the vertical louver, use wireless remote controller without fail. In case the louver does not work correctly, once stop the operation and turn on again. During in cooling or dry operation, the horizontal louver should not be downward for long time. Timer operation Before setting the timer, confirm that the present time is set accurately. Once you set the timer, the remote controller memorizes the setting. From the next time, you can operate the same timer mode just by pressing the ON/OFF button and the Timer fixing ("ON/OFF Timer") button. You can use the combined function of the "ON Timer" and "OFF Timer". 4 13 "ON Timer" Example: set the "ON Timer" to 7 a. m. Press the "TIME ADJ" 2 times. 2. Adjust the time with the button. [. . . ] All material and manufacturing defects will be repaired or replaced free of charge within this period. We expressly refuse all further damage claims, including claims for collateral damage. Repairs to or replacement of components within the guarantee period will not result in an extension of the guarantee. The guarantee is invalidated if any modifications have been made, non genuine parts are fitted or repairs are carried out by third parties. [. . . ]