User manual ZIBRO SRE139E

[. . . ] Congratulations with your purchase of a portable domestic heater. You have purchased a quality product, which will serve you for many years to come. This, of course, provided you use the heater correctly. Please read these Directions for Use first, to ensure maximum lifetime for your heater. [. . . ] the information display ¸ will show two numbers. The light next to them indicates that these numbers refer to the temperatures (Fig. The actual room temperature is indicated below ROOM, while the temperature setting is indicated below SET. The latter can be changed with the adjustment keys (refer to Section E). The temperature setting can only be adjusted, when the heater is burning. Use the adjustment keys to adjust the temperature. First press either of the two keys to min. ) to set the temperature to a switch on the function (the °C mark and 4-digit ¸ will start blinking). Next, adjust the temperature using the key on the right ( Higher setting and the key on the left ( After approximately 10 seconds the °C mark and 4-digit will stop blinking and the setting will be locked (Fig. When the heater has been unplugged (or after a power failure), the temperature will reset to the factory setting of 20°C. In order to switch on the timer, the correct time must have been set (refer to Section C) and the heater should be off. Button ¹ and then the TIMER key To set the time at which the heater must ignite. Hour) to set the hours and the key on the right Use the key on the left ( 3 After approximately 10 seconds the 4-digit will show CLOCK again and the When you want to switch off the heater and ignite it again with the timer, all you have to do is press the TIMER key (refer to Section G). Press the button ¹ once to clear the timer setting. There are two ways to switch off the heater. , when you want to switch off the heater and ignite it Again with the timer the next time. This not only switches off the heater, but it also activates the timer function. You can change the required time with the adjustment keys (refer to Section F). The information display ¸ not only serves as an indicator of the (set) time and temperature (sections C, E, and F), it also indicates any malfunctioning of the heater. The code on the information display tells you what is the matter: CODE INFORMATION Temperature within the heater too high. The heater has been in operation continuously for a period of 48 hours and has turned itself off automatically. In case of any malfunctioning the information display will tell you what is the matter. [. . . ] By opening a door or window a little more), the heater can be ignited by pushing the button ¹ again. Switch off the heater and let it cool down, before you start any maintenance work. also disconnect the plug from the mains. Your heater needs hardly any maintenance. [. . . ]