User manual ZONET KVM3008

[. . . ] First, plug the power adapter to the Master KVM. Then connect the console device and PC port link. You can connect a second and third level of one or more KVM Switches to any PC port of the Master KVM. Cascade configuration expands system ability allowing you to select computers connected to the Master or Slaves. [. . . ] Or, you may press <ESC> to exit OSD menu. 11 KVM Switch User's Guide A plus mark (+) to the left of a name indicates the port is cascaded to a Slave; the number at the above of the channel number (left corner) shows the number of port the Master link, i. e. 8 means link from upper KVM port 8 (Master layer is blank). <ENTER> key brings you one level down and the screen pops up listing the names of the computers on that Slave KVM. The name of the Slave will be shown at the OSD menu. It is useful to group computers and still be able to see the group name. Press <R> will return to upper layer OSD menu. Press <ESC> key to exit OSD and to return to the selected computer; the computer name is also shown on the screen (banner). F1: Setup Mode Figure: OSD setup screen All change is use left/right arrow key ( ) to select it. Scan Mode: Select ­ Scan selected channel. PC ON ­ Scan power on PC channel only. Scan Time: 5sec(Default) to 90sec. , 5sec. a select step Banner Display Time: 5sec. and always on (). 12 KVM Switch User's Guide Display Position: Menu ­ use four arrow key to move the OSD main menu to the desire position. Banner ­ use four arrow key to move the channel banner to the desire position. Hotkey: Scroll ­ Scroll Lock become the Hotkey. Sound: ON ­ Buzzer sound active (turn on) OFF ­ Buzzer sound disable (turn off) Language: English (En) / Deutsch (De) / Francais (Fr), three countries. Position Adjustment Figure: Select the item to setup After into the banner Display Position the display will become: 13 KVM Switch User's Guide Channel Banner (Single Layer) (Max. (press any key to into the unlock window) Unlock Window: After key-in correct User Name and Password, the system will Unlock (leave the Security mode), screen will into the normal and all device are available to operating (according the authorization setting). If you forget the password, the only way to permanently disable the security function is use a universal password to unlock KVM. You need to key-in this unlock password to release your device and KVM, then you can restart everything. Universal password will let your KVM go back to default administrator password, Universal password: (Name: EZLINK, Password: EZLINK) 19 KVM Switch User's Guide Function Control (Hot-key commands) Call OSD Menu (OSD model only) Pressing the <Scroll Lock> key twice and 'Space Bar' and <ENTER>, then the OSD 'Main Menu' will on the screen. (Or after <Scroll Lock> twice and press <ENTER> directly) Hot key can be change become<caps lock> Channel Select OSD: Use Up/Down arrow and <ENTER> to select the channel directly. Hot-key: Pressing the <Scroll Lock> key twice then Key-in a channel number (1 to 16) and press <ENTER> Left<Alt> or right <Alt> twice the PC channel will automatically shift left/right one channel (channel decrease / increase to next) while <Alt> enable. <Alt> shif function default was off, pressing hot key twice then <Alt> and <Enter> you can on/off this funtion alternately. if buzzer was on, it will generates a beep for correct operating. Auto Scan OSD: Call OSD 'Main Menu' then press <F2>. Hot-key: Pressing the <Scroll Lock> key twice then <S> and <ENTER>. Console Lock (OSD model only) OSD: Call OSD 'Main Menu' then press <F3>. [. . . ] Loose connection Double OSD images at cascade configuration 27 KVM Switch User's Guide OSD menu is not at the proper position Can not select a computer connected to a slave OSD menu has fixed resolution and its size varies due to computer VGA resolution changes. Improper Master unit connection Improper slave unit connection Too many levels of slaves Use <F1>: Setup\Position to move OSD menu and banner to proper position. The KVM Switch fails to function occasionally. Computers do not supply enough power. Only Master PC port can be connected to slaves. Connect slave CONSOLE port to PC ports of the Master Only two level of slave units is allowed. Pop up OSD again to check if Master recognizes the slave connection. [. . . ]