User manual ZONET ZEW1542

[. . . ] Copyright Statement is the registered trademark of Zonet Technology Inc. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Zonet Technology Inc. Without the permission of Zonet Technology Inc. , any individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages. All the photos and product specifications mentioned in this manual are for references only. [. . . ] Authentication Type: The type selected here must be identical to the type of the 802. 1x authentication type you're using. Domain Name: Input the domain name of 802. 1x authentication. This field will be grayed out when authentication type is not EAP-FAST. Use Client: If the authentication type is using PEAP or TTLS, you can use the certificate stored on your computer. If the authentication type is using TLS/Smart Card, this box is always checked. Allow unauthenticated provision mode: This box is always checked and can not be modified. Use protected authentication credential: If the authentication type is using EAP-FAST, you can use protected authentication credential by check this box. Remove: Remove the credential you imported previously. Import: Import the authentication credential file (PAC or al file format), you'll be prompted to select a credential file from your computer. Protocol: Select the protocol of tunneled authentication. This pull-down menu is only available when authentication type is using PEAP or TTLS. When using EAP-FAST as authentication type, the protocol setting is always Generic Token Card and can not be changed. Password Mode: Select the password mode of EAP-FAST authentication mode. This setting is hidden when the authentication type is not EAP-FAST. 10 802. 11n Wireless CardBus 4. 2 Link Status Link status page shows detail information about the current connection. 1. Status: Shows the current connected SSID / BSSID. If there's no active connection currently, "Disconnected" will be displayed. Extra Info: Shows link status and its transmit power 3. Channel: Shows the current connected channel 4. Link Quality: Based on signal strength and TX/RX packet error rate (%) 5. Signal Strength: Shows in percentage (%) or dBm 6. Noise Level: Shows noise and signal strength ratio (%). If the value of this item is high, data transfer rate will drop. [. . . ] Read the descriptions below to solve your problems. 1. Reinsert ZEW1542 into your PC's CardBus slot. Right click on My Computer and select Properties. Select the device manager and click on the Network Adapter. [. . . ]