User manual ZONET ZEW2540P

[. . . ] Copyright Statement is the registered trademark of Zonet Technology Inc. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Zonet Technology Inc. Without the permission of Zonet Technology Inc. , any individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages. 802. 11n Wireless USB Adapter Table of Content Chapter 1. [. . . ] This function will greatly improve the data transfer rate between WMM-enabled wireless devices. MAC Address: Input the MAC address of another WMM-enabled wireless device you wish to establish a direct link. Timeout Value: must be between 0~65535 in integer. If the value is zero represents it always connects. Default value of Timeout Value is 60 seconds. Tear Down: If you want to remove a specific wireless device from DLS table, select the device and click this button to remove it. 11 802. 11n Wireless USB Adapter 3. 1. 7 WPS WPS tab supports the configuration setup using PIN configuration method or PBC configuration method. WPS(Wi-Fi Protected Setup) simplify the security setup and management of Wi-Fi networks. PIN: Enter the Pin code and click PIN to automatically connect ZEW2540P with wireless devices around. PBC: Click PBC to complete auto-check and connections between ZEW2540P and other wireless device. Rescan: Update information on surrounding wireless network. Information: Display the information about WPS IE on the selected network. Config Mode: Enrollee or external Registrar. Detail: Information about Security and Key in the credential. Connect: click to connect the WPS wireless network. Rotate: Connect to the next network inside credentials. Disconnect: to disconnect the connected wireless network. Export Profile: Export all credentials to Profile. WPS associate IE: Send the association request with WPS IE during WPS setup. WPS probe IE: Send the probe request with WPS IE during WPS setup. Note: When clicking PIN or PBC button, please don't click Rescan within two-minute. If you want to abort this setup within the interval, restart PIN/PBC or press Disconnect to stop WPS. 12 802. 11n Wireless USB Adapter 3. 1. 8 SSO SSO (Backup Exec for Windows servers SAN Shared Storage Option) is a strong LAN-free backup solution. 3. 1. 9 CCX Enable CCX(Cisco Compatible eXtensions): Enable Radio Measurement: channel measures every 0~1023 milliseconds 13 802. 11n Wireless USB Adapter 3. 2 AP Mode ZEW2540P also can serve as an access point to transmit wireless signals and create wireless network, allowing other wireless clients to access the network. Right-click the tray icon and select Switch to AP Mode. 14 802. 11n Wireless USB Adapter 3. 2. 1 Configuration In soft AP configuration Utility page, you can make some basic configurations, such as wireless network name, mode, channel and authentication. Click Security Setting button to make different security configurations of wireless communication, and you can choose the authentication type or encryption type. Note: 1. The Hex characters include 0~9 numbers and a~f letters. ASCII characters include any numbers/letters and characters. 15 802. 11n Wireless USB Adapter 3. 2. 2 Access Control Choose Access Control tab to start MAC control. Access control includes Allow All and Reject All. [. . . ] This prevents several clients from trying to establish a BSS at the same time, which can result in multiple singular BSSs being established, rather than a single BSS with multiple clients associated to it. Check that the Network Connection for the wireless client is configured properly. If Security is enabled, make sure that the correct encryption keys are entered on both ZEW2540P and the access point. 25 802. 11n Wireless USB Adapter Q4. I can't find any wireless access point / wireless device in Network tab. [. . . ]