User manual ZONET ZEW2546

[. . . ] ZEW2546 giving you an instant network today, and the flexibility to handle tomorrow's expansion and speed. 1. 2 Product Feature Complies with IEEE 802. 11n, IEEE 802. 11g and IEEE 802. 11b standards Provides USB2. 0 port Provides 300Mbps receiving rate and 150Mbps sending rate Supports 20MHz/40MHz frequency width Auto-detects and changes the network transmission rate Provides two work modes: Infrastructure and Ad-Hoc Supports 64/128-bit WEP, WPA, WPA2 encryption methods and 802. 1x security authentication standard WPS (Wi-Fi Protected Setup) simplify the security setup and management of Wi-Fi networks. Supports WMM for Multimedia Applications with Quality of Service in Wi-Fi® Networks 1. 3 Contents of Package One ZEW2546 One Installation CD w/User Manual One Quick Installation Guide Contact your local authorized reseller or the store purchased from for any items damaged and/or missing. 2 802. 11n Wireless USB Adapter 1. 4 Before You Begin You must have the following: A laptop computer/desktop PC with an available USB 2. 0 slot Minimum 300MHz processor and 32MB memory Windows 2000, XP, Vista, 7 A CD-ROM Drive USB controller properly installed and working in the laptop computer 802. 11n or 802. 11b/g Access Point (for infrastructure Mode) or another 802. 11n or 802. 11b/g wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode. ) 3 802. 11n Wireless USB Adapter Chapter 2 Installation 2. 1 Software Installation NOTE: Snap-shot screens of the following installation procedure are based on Windows XP. Installation procedures will be similar for other windows operating systems. 1. Insert Installation CD to your CD-ROM drive. [. . . ] to run the 3. 1 General General tab shows detail information about the current connection. 3. 2 Profile Profile can keep your favorite wireless setting among your home, office, and other public hotspot. You may save multiple profiles and activate the one at your preference. 7 802. 11n Wireless USB Adapter 3. 2. 1 Add/Edit Profile Name: Specify one name for the profile SSID: Name of intended wireless network. Network Type: Infrastructure: A wireless Router and/or Access Point is required. Ad-hoc: Peer-to-Peer network, no base station required. Check the checkbox to activate Ad-hoc mode. Channel: Channel of the connected wireless network. Authentication: Select from Open System, Shared Key, WPA-PSK, WPA2-PSK, WPA 802. 1x, WPA2 802. 1x, WEP 802. 1x, WPA CCKM and WPA2 CCKM. Encryption: Select from WEP, TKIP, AES, and Disable 8 802. 11n Wireless USB Adapter 3. 2. 2 Remove Select a profile and click Remove button to delete this profile. 3. 2. 3 Duplicate Select a profile which you want to copy and then click Duplicate. Input the new profile name when Profile Name window appears. 9 802. 11n Wireless USB Adapter 3. 2. 4 Set Default Select a profile and click Set Default button to make the profile connecting to wireless network automatically when the utility running next time. 3. 3 Available Network Under Available Network tab, you will know information of all surrounding wireless networks from the last scan. Click Refresh to update and refresh. 10 802. 11n Wireless USB Adapter Double-click the network you want to connect. Modify the profile information according to your demand. 3. 4 Status Status tab displays the detailed information of current connection. 11 802. 11n Wireless USB Adapter 3. 5 Statistics Statistics tab displays the detail counter information based on 802. 11 MIB counters. This page translates that MIB counters into a format easier for user to understand. Reset: to renew the statistics. 3. 6 Wi-Fi Protect Setup Wi-Fi Protect Setup tab supports the configuration setup using PIN configuration method or PBC configuration method. WPS simplify the security setup and management of Wi-Fi networks. 12 802. 11n Wireless USB Adapter 3. 6. 1 Pin Input Config (PIN) 1. Input ZEW2546's PIN Code into AP and click Start PIN on the AP-Router WPS config page Note: AP operating page may vary but similar from different brands. 2. Click Pin Input Config(PIN) under ZEW2546 Wi-Fi Protect Setup tab 3. Select one WPS AP you want to connect and click Select. 13 802. 11n Wireless USB Adapter 4. Wait until PIN method window appear, the secure connection between AP and ZEW2546 will be founded automatically. 14 802. 11n Wireless USB Adapter 3. 6. 2 Push Button Config (PBC) 1. Click Push Button Config (PBC) under ZEW2546 Wi-Fi Protect Setup tab. 2. Click Start PBC on the AP-Router WPS config page or push the WPS button on your AP. Note: AP operating page may vary but similar from different brands. 3. Wait until PBC method window appear, the secure connection between AP and ZEW2546 will be founded automatically. Note: If there is more than one AP on PBC mode, there will be session overlap. Please using PIN Input Config(PIN) or wait for a while push the button again. 15 802. 11n Wireless USB Adapter Chapter 4 Product Specifications Specifications: Chipset Standards Interface OS Frequency Range Modulation Method 11b speed 11g 11n 11b 11g 11n Realtek RTL8191SU IEEE 802. 11n, IEEE 802. 11g, IEEE 802. 11b USB2. 0 Windows 2000/ XP/ Vista/ 7 2. 412GHz~2. 4835GHz CCK , OFDM 11 Mbps/9 Mbps/6 Mbps/5. 5 Mbps/2 Mbps/ 1 Mbps 54 Mbps/48 Mbps/36 Mbps /24 Mbps/ 18 Mbps/12 Mbps/11 Mbps/9 Mbps/6 Mbps 300Mbps ~ 270Mbps 18dBm 15dBm 13dBm 64/128-bit WEP, WPA/WPA2, 802. 1x printed antenna 11 Channels (USA, Canada) 13 Channels (Europe) 14 Channels (Japan) Indoors : up to 150 meters Outdoors : up to 600 meters 0ºC ~ 50ºC -40ºC~70ºC 10%~ 90% RH Non-condensing 5% ~ 90% RH Non-condensing Link/Activity 60mm x 24mm x 8. 5mm 7. 7g Output Power Security Antenna type Channels Transmit distance Operating Temperature Storage Temperature Operating Humidity Storage Humidity LED Dimension(L x W x H) Weight 16 802. 11n Wireless USB Adapter Chapter 5 TroubleShooting This chapter provides solutions to problems that may occur during the installation and operation of ZEW2546. Read the descriptions below to solve your problems. 1. Reinsert ZEW2546 into your PC's USB slot. [. . . ] What should I do when the computer with ZEW2546 installed is unable to connect to the wireless network and/or the Internet?Check that the LED indicators for the broadband modem are indicating normal activity. If not, there may be a problem with the broadband connection. Check that the LED indicators on the wireless router are functioning properly. [. . . ]