User manual ZONET ZEW2590

[. . . ] Copyright Statement is the registered trademark of Zonet Technology Inc. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Zonet Technology Inc. Without the permission of Zonet Technology Inc. , any individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages. 802. 11n High Gain USB Adapter Table of Content Chapter 1. [. . . ] This page translates that MIB counters into a format easier for user to understand. 11 802. 11n High Gain USB Adapter 3. 1. 6 WMM WMM Enable: Enable Wi-Fi Multi-Media WMM - Power Save Enable: Enable WMM Power Save Direct Link Setup Enable: Enable DLS (Direct Link Setup). This function will greatly improve the data transfer rate between WMM-enabled wireless devices. MAC Address: Input the MAC address of another WMM-enabled wireless device you wish to establish a direct link. Timeout Value: must be between 0~65535 in integer. If the value is zero represents it always connects. Default value of Timeout Value is 60 seconds. Tear Down: If you want to remove a specific wireless device from DLS table, select the device and click this button to remove it. 12 802. 11n High Gain USB Adapter 3. 1. 7 WPS WPS tab supports the configuration setup using PIN configuration method or PBC configuration method. WPS(Wi-Fi Protected Setup) simplify the security setup and management of Wi-Fi networks. PIN: Enter the Pin code and click PIN to automatically connect ZEW2590 with wireless devices around. PBC: Click PBC to complete auto-check and connections between ZEW2590 and other wireless device. Rescan: Update information on surrounding wireless network. Information: Display the information about WPS IE on the selected network. Config Mode: Enrollee or external Registrar. Detail: Information about Security and Key in the credential. Connect: click to connect the WPS wireless network. Rotate: Connect to the next network inside credentials. Disconnect: to disconnect the connected wireless network. Export Profile: Export all credentials to Profile. Delete: Delete an existing credential. Note: When clicking PIN or PBC button, please don't click Rescan within two-minute. Click Properties to configure authentication of wireless connection. 20 802. 11n High Gain USB Adapter 6. Advanced page configures firewall and connection sharing. 21 802. 11n High Gain USB Adapter Chapter 4 How to connect with PSP 4. 1 Configure PSP with Ad-Hoc mode 1. Select Channel on PSP 22 802. 11n High Gain USB Adapter 4. Select Start Control Panel double-click System icon select Hardware tab click Device Manager button select ZEW2590 (802. 11n USB Wireless LAN Card) list in Network adapters 5. [. . . ] Please note that it might be necessary to set up one client to establish a BSS (Basic Service Set) and wait briefly before setting up other clients. This prevents several clients from trying to establish a BSS at the same time, which can result in multiple singular BSSs being established, rather than a single BSS with multiple clients associated to it. Check that the Network Connection for the wireless client is configured properly. If Security is enabled, make sure that the correct encryption keys are entered on both ZEW2590 and the access point. 26 802. 11n High Gain USB Adapter 4. [. . . ]