User manual ZONET ZEW3003

[. . . ] ZEW3003 provides five work modes: AP, WDS, AP+WDS, Repeater Client Ad-hoc and Client Infrastructure. It also supports 64/128-bit WEP, WPA, WPA2. The MAC address filter can protect your network against any malicious intrusion. Moreover, the Web management utility can benefit you to manage the device easily. 1. 2 Features Supports IEEE 802. 11g, IEEE 802. 11b standards Provide wireless AP, Client, WDS, AP+WDS, Repeater mode Provide 1 LAN port, 10/100M Auto-Negotiation, supports Auto MDI/MDIX Support 54/48/36/24/18/12/11/9/6/5. 5/2/1 wireless data transfer rates Support basic DHCP server settings Support remote and Web management. [. . . ] Channel: Select the operating channel for your wireless network. 11 4. 4. 1 AP IAPP: Enable it to allow wireless station roaming between IAPP enabled access points within the same wireless LAN. In AP mode, ZEW3003 will act as a central hub for different wireless LAN clients. For example, when traveling to a hotel that has high-speed internet access, you can connect to the internet through ZEW3003 which is connected to an Ethernet cable in the room. 12 4. 4. 2 Client SSID: Default value is default. Network Type: Select from Infrastructure and Ad-Hoc. Default setting is Infrastructure. In Client mode, ZEW3003 associates with another AP within its range. WEP uses a combination of 64-bit or 128-bit keys to provide access control to your network and encryption security for every data transmission. Accessorial Authentication & Encryption: Select from Open System, Shared Key and Auto Select. Shared Key requires the same WEP keys between ZEW3003 and work station. Key Length: The higher the encryption bit, the more secure your network. WEP Mode: ASCII: Enter 13 characters with case sensitive ("a-z", "A-Z" and "0-9"). Hex: enter 26 Hex characters ("A-F", "a-f" and "0~9"). 17 Key1, 2, 3, 4: Input WEP key characters here, the number of characters must be the same as the number displayed at WEP Mode. You must enter at least one encryption key here, and if you entered multiple WEP keys, they should not be same with each other. 4. 5. 3 802. 1X Enterprise This security mode is used when a RADIUS server is connected to ZEW3003. IEEE 802. 1x is an authentication protocol. Every user must use a valid account to login to ZEW3003 before accessing the wireless LAN. The authentication is processed by a RADIUS server. This mode only authenticates user by IEEE 802. 1x, but it does not encryption the data during communication. Radius Server IP: Input the IP address of Radius server here. Radius Port: Input the port number of the Radius server here. Radius Password: Input the password of Radius server here. WEP: Select enable 64 bit WEP, 128 bit WEP or Disable WEP encryption which indicates the authentication process between wireless adapter and ZEW3003. 18 4. 5. 4 WPA Personal Wi-Fi Protected Access (WPA) is an advanced security standard. It uses TKIP and AES to change the encryption key frequently. Accessorial Authentication & Encryption: Default setting is TKIP. Key: Enter the key which must have 8-63 ASCII characters. 4. 5. 5 WPA Enterprise This security mode is used when a RADIUS server is connected to ZEW3003. Accessorial Authentication & Encryption: Default setting is TKIP. Radius Server IP: Input the IP address of Radius server here. Radius Port: Input the port number of the Radius server here. Radius Password: Input the password of Radius server here. 19 4. 5. 6 WPA2 Personal WPA2 is a stronger version of WPA. Accessorial Authentication & Encryption: Default setting is AES. [. . . ] Troubleshooting Q1: If you have trouble connecting to the Internet, try the following steps. Power off the Cable/DSL modem, ZEW3003, and computer and wait for 5 minutes. Turn on the Cable/DSL modem and wait for the lights on to settle down. Turn on ZEW3003 and wait for the lights on to settle down. [. . . ]