User manual ZONET ZSR9104WE

[. . . ] Copyright Statement is the registered trademark of Zonet Technology Inc. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Zonet Technology Inc. Without the permission of Zonet Technology Inc. , any individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages. Table of Contents Chapter 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Key Renewal Interval: Specifies the timer the WPA key must changes. The change is done automatically between the server and the client. 31 d. Mixed WPA/WPA2-Personal WPA Algorithms: Select one encryption type, AES, TKIP or TKIP&AES. Pass Phrase: Enter the key which must have 8-63 ASCII characters. Key Renewal Interval: Specifies the timer the WPA key must changes. The change is done automatically between the server and the client. 32 Advanced Wireless Settings ZSR9104WE provides some advanced control of wireless parameters, if you want to configure these settings, please click "WLAN Settings" menu on the left of web management interface, then click "Advanced Settings", and the following message will be displayed on your web browser: BG protection Mode: Auto by default. Basic Data Rates: For different requirement, you can select one of the suitable Basic Data Rates. Beacon Interval: Set the beacon interval of wireless radio. Do not modify default value if you don't know what it is, default value is 100. Fragment Threshold: Set the Fragment threshold of wireless radio. Do not modify default value if you don't know what it is, default value is 2346. RTS Threshold: Set the RTS threshold of wireless radio. Do not modify default value if you don't know what it is, default value is 2347. TX Power: You can set the output power of wireless radio. Unless you're using ZSR9104WE in a really big space, you may not have to set output power to 100%. This will enhance security (malicious / unknown users in distance will not be able to reach your ZSR9104WE). WMM Capable: It will enhance the data transfer performance of multimedia contents when they're being transferred over wireless network. If you don't know what it is / not sure if you need it, it's safe to set this option to `Enable', default value is Enable. APSD Capable: It is used for auto power-saved service. The default is Disabled. 33 WPS Settings Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless network clients and ZSR9104WE. You don't have to select encryption mode and input a long encryption passphrase every time when you need to setup a wireless client, you only have to press a button on wireless client and this wireless router, and the WPS will do the rest for you. WPS Setting: Select it to enable or disable WPS function. WPS Mode: Supports two ways to configure WPS settings: PBC) and PIN code. [. . . ] And you need modify the default MTU value (1492). Please in the "WAN Setting" modify the MTU value with the recommended value as 1450 or 1400. 54 Q5. How to configure and access the Internet via Dynamic IP?In Setup Wizard of the Web utility interface, select "Dynamic IP" connection type and click "Save" to activate it. [. . . ]