User manual ZONET ZVC7610

[. . . ] Table of Contents CHAPTER 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. 1 PACKAGE CONTENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. 2 KNOW YOUR ZVC7610. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 3 FEATURES AND BENEFITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Click OK to add it to the Schedule Profiles list. Click Delete to delete the selected profile from the list. - 24 - - Profile Name: Display profile name(s) that you added to the Schedule Profiles list - Weekdays: Select the day(s), Monday to Friday, which you want to assign in the schedule profile separately. Assigned weekday(s) will display in green color - Time List: Display the period of time that you have assigned within the selected weekday(s). Click Add this to all weekdays to assign the same period of time to every weekday(s). Click Delete this from all weekdays to remove the selected period from every weekday(s). - Start/End Time: Enter the start and end time and then click Add to assign a time period within in the selected weekday. Event Configuration >> Motion Detect Trigger Select Enable option to enable the trigger function of the ZVC7610 to send captured images of the detecting area(s) to an FTP server, email receiver, Network Storage server, or any connected USB device. - Schedule Profile: Select a Schedule Profile from the drop-down list. - Action: Select a destination for the captured images to be sent to: Send Email or FTP Upload. Event Configuration >> Schedule Trigger You can configure the schedule for trigger function of the ZVC7610 separately with Email, or FTP. Select Enable option on each item, then select a Schedule Profile from the dropdown list and set the Interval time. - 25 - 4. 9 Tools The Tools menu provides commands that allow you to restart and/or reset the ZVC7610. You can also backup, restore your configuration, and upgrade firmware for the ZVC7610. Factory Reset Click Reset to restore all factory default settings for the ZVC7610. System Reboot Click Reboot to restart the ZVC7610. It will power OFF the under then power ON automatically. ZVC7610 configuration will be retained after System Reboot. Configuration You can save your ZVC7610 configuration as a backup file on your computer. You can restore it by retrieving the backup file. Backup: Click Get the backup file to save the current configuration of the ZVC7610 to your computer. - Restore: Click Browse to locate the backup file and click Restore the configuration of the ZVC7610. Update Firmware It displays the current firmware version. You can upgrade it once you obtained a latest version of firmware. - Select the firmware: Click Browse to locate the updated firmware file and click Update. [. . . ] SIP (Session Initiated Protocol) is a standard protocol that delivers the real-time communication for Voice over IP (VoIP), which establishes sessions for features such as audio and video conferencing. The Simple Mail Transfer Protocol is used for Internet mail. SNMP was designed to provide a common foundation for managing network devices. In LANs, a station consists of a device that can communicate data on the network. [. . . ]