User manual ZONET ZVC7610W

[. . . ] Table of Contents CHAPTER 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. 1 PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. 2 KNOW YOUR ZVC7610W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 3 FEATURES AND BENEFITS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select Vertical to mirror the image vertically - Light Frequency: Select the proper frequency according to the location of ZVC7610W: 50Hz, 60Hz, or Outdoor Overlay Setting - Includes Date & Time: Select this option to display the date & time stamp on the live view image - Enable Opaque: Select this option to set a black background to the displayed date & time stamp Video >> Video MJPEG - Video Resolution: Select the desired video resolution in three different formats: VGA, QVGA and QQVGA. The highest setting (VGA) gives you better video quality while it uses more resources within your network. - Video Quality: Select the desired image quality in five different levels: Lowest, Low, Medium, High, and Highest. - Frame Rate: Select Auto or a proper setting depending on your network status. - 24 - 4. 6 Event Server Configuration The Event Server menu contains three sub-menus that allow you to upload images to FTP and send emails with images. After you complete the required settings for FTP, or Email, click Test to test the configuration to see if it is correct or not. After test is successful, click Apply. - 25 - Event Server Setting>> FTP FTP - Host Address: Enter the IP address of the target FTP server - Port Number: Enter the port number for the FTP server - User Name: Enter the user name to login to the FTP server - Password: Enter the password to login to the FTP server - Directory Path: Enter the destination folder for uploading the images, for example: /Test/ - Passive Mode: Select Enable to enable the passive mode Event Server Setting >> Email Email - SMTP Server Address: Enter the mail server address, for example: mymail. com - Sender Email Address: Enter the email address of the user who will send the email, for example: John@mymail. com - Sender User Name: Enter the sender email address username to login the mail server - Sender Password: Enter the sender email address password to login the mail server - Receiver #1 Email Address: Enter the first email address of the receiver who will receive the email - Receiver #2 Email Address: Enter the second email address of the receiver who will receive the email - 26 - 4. 7 Motion Detect The Motion Detect menu contains the command and option that allow you to enable and setup the motion detection feature of the ZVC7610W. To enable the detecting areas, select Window 1 or 2 from the drop-down list, and select Enable. When the detecting area(s) is enabled, you can use the mouse to move the detecting area(s) and change the area coverage. - Name: Assign a name of the detecting area(s) - Threshold: Move the slide bar to adjust the level for detecting motion and record video - 27 - 4. 8 Event Config The Event Config menu contains four sub-menus that provide the commands to configure event profiles. Event Configuration >> General Setting - Snapshot/Recording Filename Prefix: You can assign a given prefix to each new captured file. Leave this option blank to use the default setting. Event Configuration >> Arrange Schedule Profile This sub-menu displays the scheduled profile(s). To customize the profile, click Add and enter a description for the profile in the prompt dialog window. Click OK to add it to the Schedule Profiles list. Click Delete to delete the selected profile from the list. - 28 - - Profile Name: Display profile name(s) that you added to the Schedule Profiles list - Weekdays: Select the day(s), Monday to Friday, which you want to assign in the schedule profile separately. Assigned weekday(s) will display in green color - Time List: Display the period of time that you have assigned within the selected weekday(s). Click Add this to all weekdays to assign the same period of time to every weekday(s). Click Delete this from all weekdays to remove the selected period from every weekday(s). - Start/End Time: Enter the start and end time and then click Add to assign a time period within in the selected weekday. Event Configuration >> Motion Detect Trigger Select Enable option to enable the trigger function of the ZVC7610W to send captured images of the detecting area(s) to an FTP server, or email receiver. - Schedule Profile: Select a Schedule Profile from the drop-down list. - Action: Select a destination for the captured images to be sent to: Send Email, or FTP Upload. Event Configuration >> Schedule Trigger You can configure the schedule for trigger function of the ZVC7610W separately with Email, or FTP. Select Enable option on each item, then select a Schedule Profile from the drop-down list and set the Interval time. - 29 - 4. 9 Tools The Tools menu provides commands that allow you to restart and/or reset the ZVC7610W. You can also backup, restore your configuration, and upgrade firmware for the ZVC7610W. Factory Reset Click Reset to restore all factory default settings for the ZVC7610W. [. . . ] SIP (Session Initiated Protocol) is a standard protocol that delivers the real-time communication for Voice over IP (VoIP), which establishes sessions for features such as audio and video conferencing. The Simple Mail Transfer Protocol is used for Internet mail. SNMP was designed to provide a common foundation for managing network devices. In LANs, a station consists of a device that can communicate data on the network. [. . . ]