User manual ZONET ZVS4204

[. . . ] TABLE OF CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P2 PRODUCT FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Useful applications for the VGA Splitter include and not limited to: · Financial Institutes: Remotely display of stock market information · Educational purposes: Remotely display class lectures and seminars to lecture halls and classrooms · Business: Remotely display of presentation to other rooms, video conferencing, and demonstrations Features · · · · · Duplicates Video Signals from 2 or 4 Computers Distance Transmission - up to 65 m (210ft) Supports 400 MHz Bandwidths Supports VGA, SVGA, XVGA, and Multisync Monitors High Resolution Video - up to 2300 X 1440 Specifications Operation and Storage parameters: Operating Temperature: Storage Temperature: Humidity: VGA In Port HDB 15 pin Male VGA Out Ports HDB 15 pin Female 0 ~ 40°C 32 ~ 104°F ­20 ~ 60°C ­4 ~ 140°F 0~80% RH Non-condensing -2- Display Diagrams Front View PWR/SIG LED Green ­ VGA Splitter is receiving power from the power adapter Orange ­ VGA Splitter is transmitting video signals Rear View VGA in Port: VGA cable connects to the computer's VGA output port VGA out Ports: VGA cables connect to the monitors -3- Hardware Installation Before you begin, make sure all devices are power-off. NOTE: To prevent damage to your hardware due to ground potential differences, make sure all devices (computer, monitor, and VGA Splitter) are properly grounded during installation. Zonet will not be responsible for any damaged caused in this way. Connecting the VGA 1. Make sure that computer and monitors you are installing are powered off. Connect the VGA cable female end into the VGA splitter's VGA In Port. Connect the VGA cable male end into the computer's VGA output port. Connect the monitor cable(s) into the VGA Out Port. Connect the provided power adapter to the power port. Power on all devices. -4- FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, if it is not install and use in accordance with this instruction, harmful interference to radio communication may caused. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation. · CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Limited Warranty Zonet offers limited warranty for its product only to the person or entity who originally purchased the product from Zonet or from its authorized resellers and/or distributors. -5- [. . . ]