User manual ZOOM G3X

[. . . ] 1t Audio Driver (Not Responding)" may appear, but this is not a problem. Start-up Guide Read This First Thank you for selecting the ZFX Stack package/ZFX Control package. The ZFX Stack package/ZFX Control package includes the ZFX Plug-in which gives access to a wide range of amplifier sounds and effects, with amazingly versatile settings. The ZFX Plug-in can of course be used on its own, but it also works great in combination with the bundled DAW application or other DAW applications that you may own. [. . . ] CH1 [PEAK] indicator lights on when the signal is too large. 1t : hardware specifications G Number of Audio Record/ Playback Channels G Audio Sampling G Frequency Response G USB G Inputs •Hi-z Input Record: 1 pair of stereo Playback: 1 pair of stereo 24bit 48kHz/44. Jp © ZOOM Corporation Reproduction of this manual, in whole or in part, by any means, is prohibited. zFX-Hardware-E-1 HARDWARE MANUAL Controls and indicators of S2t CH1[TUBE] knob PHANTOM[ON/OFF] switch CH1[SOLIDSTATE] knob CH2[PEAK] indicator [OUTPUT] knob * Available only for CH2[GAIN] knob [PHONES] knob Hi-Z jack. [DIRECT MONITOR] knob CH1[PEAK] indicator [MONO/STEREO] switch Connections and Functions 9 Rhythm machine 6 Monitor System (Audio component/ Amplified speaker) 1 Guitar/Bass Connect your guitar/bass to the Hi-Z jack with a monaural shielded cable. To enable the Hi-Z input, turn the INPUT SELECT [Hi-Z/MIC/LINE] switch at the front panel to "Hi-Z" CH/R jack. XLR plugs, stereo phone plugs (balanced), and monaural phone plugs (unbalanced) can be connected. to enable , turn the INPUT SELECT [Hi-Z/MIC/LINE]switch to "MIC". Phantom power might be supplied to the condenser microphones with turning on the PHANTOM [ON/OFF] switch. 7 Dynamic microphone and condenser microphone 2 Headphone 2 Headphone Headphones should be connected to the PHONES jack, and its volume can be adjusted with [PHONES]knob. 3 Foot Switch(ZOOM FS-01) 8 MTR The foot switch ZOOM FS-01 (optional) can be connected to the FOOT SW jack as an external control interface of effect parameters. From the "Devices" menu of Cubase LE 4, select "VST Connections" and select the device containing the string "ZOOM S2t C5. 1t In (Out)" as input port and output port. A new stereo audio track is added to the project window. New audio track Insert the supplied "Cubase LE 4" DVD-ROM into the DVD drive of the computer, and perform the installation steps. When you insert the DVD-ROM, a screen asking what you want to do appears. select "Open folder to view files". When the contents of the DVD-ROM are shown, open the "Cubase LE 4 for Windows" folder by double-clicking on it, and then doubleclick the executable "Setup" ("Setup. exe") file to start the installation process. Make the following settings for the newly created audio track. In the "Sound" window, verify that "ZOOM S2t C5. 1t Audio" is listed under the Play and Record devices and that the device is checked. [. . . ] To start recording, click the Record button in the transport panel. Click monitoring button so that it lights up in orange. Click recording standby button so that it lights up in red, to activate recording standby condition. As you play your instrument, the waveform appears in real time in the project window. [. . . ]