User manual ZOOM MRS802V2

[. . . ] MRS802v2(E). fm 1 ページ ２００４年５月２７日　木曜日　午後５時５９分 MRS-802 Version 2. 0 Supplemental Manual This document explains functions and features that have been added to the MRS-802 Version 2. 0. Contents New features of MRS-802 Version 2. 0 . 3 Making MIDI Time Code (MTC) settings . 3 Continuous project playback (sequence play function) . 6 Creating a CD using the disc-at-once method . [. . . ] (Subsequent projects are renumbered. ) ● To delete a project from a playlist Use the cursor left/right keys to select the playback number you want to delete. Press the [DELETE/ ERASE] key in the control section. The indication “DELETE SURE?” appears on the display. To delete the project from the playlist, press the [ENTER] key. (Subsequent projects are renumbered. ) ● To delete all projects from a playlist On the playlist registration screen, press the [DELETE/ERASE] key in the control section and then the cursor down key. The indication “ALL DEL SURE?” appears on the display. To delete all projects from the playlist, press the [ENTER] key. ● To switch the V-take for the master track Press the [EXIT] key repeatedly to return to the main screen. Load the project for which you want to switch the V-take, and select the V-take for the master track. Then return to the playlist registration screen. ZOOM MRS-802 Ver 2. 0 5 MRS802v2(E). fm 6 ページ ２００４年５月２７日　木曜日　午後５時５９分 Continuous project playback (sequence play function) ● PLAY[R] key Playlist playback Select the playlist for continuous project playback as follows. Starts playback from the beginning of the current project. ● STOP[P] key 1. From the main screen, press the [PROJECT] key in the display section. Use the cursor left/right keys to bring up the indication “PROJECT SEQ PLAY” on the display, and press the [ENTER] key. The display shows the screen for selecting a playlist. When a CD written with track-at-once is played on a CD player, a mute section of two seconds follows each track. This method is suitable for creating a regular music CD where each track is separated by blanks. ● Disc-at-once (DAO) 1. Insert a CD-R/RW disc into the integrated CD-R/RW drive. Use a blank CD-R/RW disc or a CD-RW disc that has been completely erased. 2. Verify that the V-takes you want to use for the audio CD are selected for the master tracks of the projects. The master tracks of projects registered in the album are written to the CD in a single operation without gaps. When a CD written with disc-at-once is played on a CD player, the disc plays through without interruption, because the multiple tracks are joined seamlessly. If necessary, you can use marks as PQ subcode information (indicating track start/end points and other information) to divide a single project into multiple tracks for creating the audio CD. This is convenient to make a CD of a continuous live performance where the listener can still jump to specific songs. 3. From the main screen, press the [CD-R/ RW] key in the display section. The CD-R/RW menu appears. 4. Verify that “CD-R/RW AUDIO CD” is shown on the display and press the [ENTER] key. The display indication changes as follows. AUDIO CD BURN CD 5. Use the cursor left/right keys to bring up the indication “AUDIO CD ALBUM” on the display, and press the [ENTER] key. In this condition, you can select the write method. HINT If you burn the CD with disc-at-once, but still want to have blanks between specific songs, you should add a blank portion to the master track of each respective project. ALBUM TYPE:DAO ZOOM MRS-802 Ver 2. 0 7 MRS802v2(E). fm 8 ページ ２００４年５月２７日　木曜日　午後５時５９分 Creating a CD using the disc-at-once method Turn the dial to select “DAO (disc-at-once)” or “TAO (track-at-once)”, and press the [ENTER] key. The screen for registering projects for the album appears. 6. END OF PROJECT 9. 2 END OF PROJECT 0 0 0 1 Turn the dial to select the project to be used as track 2 of the album. 10. In the same way, select projects for track 3 and subsequent tracks. [. . . ] To terminate the process, press the [EXIT] key. 1. Load the project that you want to split into multiple tracks, and set marks at the points where the tracks should be separated. Marker-based track separation can only be enabled or disabled for the entire project. Delete any unnecessary marks beforehand. 2. Perform steps 1 - 6 of “Creating an audio CD by album”, select the disc-at-once (DAO) write method, and bring up the album screen. END OF PROJECT 0 0 0 1 13. To return to the main screen, press the [EXIT] key several times. 3. [. . . ]