User manual ZOOM PLAYER 1010

[. . . ] ADVANCED GUITAR EFFECTS PROCESSOR ZOOM PLAYER Operation Manual Thank you for selecting the Advanced Guitar Effects Processor ZOOM Player 1010 (hereafter called "1010"). Outstanding Features 25 versatile built-in individual effects. Up to six effects can be combined in a patch, and up to 42 patches (12 user memory patches and 30 preset patches) are available, offering extraordinary flexibility. Integrated foot switches and informative control panel show settings at a glance and allow easy operation like a compact effect. Distortion effect is generated using analog circuitry, to assure rich and natural-sounding sustain and distortion effect. [. . . ] This activates the store standby condition. HINT With each push of the PARAM SELECT key, the selected parameter moves one position down. When PARAM 4 is reached, the cursor loops back to PARAM 1. PARM PARM 1 PARM 2 PARM 3 PARM 4 PARM 1 PARM PARM PARM Storing is possible also in the Play mode. PARM The value of the selected effect parameter is shown on HINT the display. If the display shows only " ", the effect module is OFF. Set the effect module to ON before editing, as described on page 8. 2. Choose the bank and patch number in which you want to store the patch. Use the BANK pedal to first select the bank and then specify the patch number with the pedals 1 ­ 3. NOTE 4. Use the VALUE value. HINT +/- keys to change the parameter For details on the parameters of each effect module, please refer to "Effect Types and Parameters" on pages 9 ­ 12. Parameter setting changes made in this way are only temporary. If you return to the Play mode or select a different patch without storing the new settings first, the settings will be lost. Patches cannot be stored in the PRESET group. If a patch was chosen from the PRESET group, the store destination will automatically become the USER group. Specify a bank and patch number in the USER group. NOTE 3. If no bank and patch number is specified for a patch selected from the USER group, the patch will be stored in the original location. If no bank and patch number is specified for a patch selected from the PRESET group, the patch will be stored in "A1" of the USER group. HINT For details on how to store a patch, please refer to the explanation at right. Switching Effect Modules On and Off In the Edit mode, effect modules can be turned on and off independently. Pressing a pedal corresponding to an effect module that is currently on (module cursor indicator lit) turns the effect module off. Press the pedal again to turn the effect module back on. When a patch is stored, the patch that was previously stored in that number will be overwritten (erased). Take care not to erase a patch that you want to keep. When wishing to restore all factory preset patches, please refer to "Reinitializing the 1010 (Special Mode)" on page 13. Restoring individual patches is not possible. 4. Press the STORE key again. The patch is stored, and the 1010 reverts to the Play mode. NOTE If the STORE key has not yet been pressed for the second time, you can use the EDIT key to cancel the store process and return to the Play mode. Effect Types and Parameters In this section, all effect types and parameters of the 1010 are explained. Parameters that are the same for several effects are explained in detail only the first time they appear. COMP&WAH 1 COMPRESSOR & WAH DISTORTION 1 RHYTHM 2 Classic OD 3 Valve OD 4 Vintage DRIVE 5 DRIVE Master 6 FUZZ 7 Power LEAD 8 METAL T AMP SIM 9 10 11 12 13 14 15 16 EQ 1 EQUALIZER CHO/FLG 1 CHORUS 2 FLANGER 3 DOUBLING REV/DLY 1 HALL 2 ROOM 3 DELAY PATCH LEVEL Effect Module 1 COMP & WAH (Compressor & Wah) This module combines a compression with a wah effect. Using the compressor and wah together is also possible. 1 Effect Module 2 DISTORTION This module comprises eight kinds of distortion effects and eight different amp simulators (which recreate the sound of picking up a guitar amplifier with a microphone). HINT COMP & WAH (Compressor & Wah) The compressor maintains the volume at a given level without impairing the sense of tone and attack. Wah emphasizes the frequency of the guitar. If the optional foot pedal FP01 is used, the emphasized frequency range can be shifted up and down with the pedal. 1 When using the unit with a guitar amplifier, choose settings 1­ 8. When monitoring via an audio speaker or headphones, use settings 9­ 16. [. . . ] 1. To protect the speaker, turn the amplifier volume to minimum, and then turn off the 1010 by disconnecting the AC adapter. 2. Turn the 1010 back on by connecting the AC adapter while keeping the STORE key depressed. The indication "AL" flashes on the display. This shows that the unit is ready for recalling all patches from the interna. l ROM. [. . . ]