User manual ZOOM Q3HD

[. . . ] (L = low sensitivity, H = high sensitivity, AUTO = automatic) Part functions Input sound from an external device. Output sound to headphones or external equipment. A ZOOM AD-14 AC adapter (sold separately) can be connected here. Output analog video and audio to a TV, for example. [. . . ] The amount of recording time available decreases as the sound quality is increased. 1. Press Setting the sound quality 2. Use press to select SOUND and to open the SOUND QUALITY menu. 3. Change each item as desired. Format Select PCM or AAC format. Sample Rate If set to PCM, the sample rate can be changed. Bit Length/Rate If set to PCM, the bit length can be changed. If set to AAC, the bit rate can be changed. 1, 4 2, 3 4. Press again after the setting is made. 10 Recording audio and video Recording audio and video From the main operation screen, you can start recording audio or video by pushing a single button. 1. After preparing to record audio or video, press to start recording. · Use the CAMERA menu to set whether to record video with audio or audio only. to zoom in 1, 2 · Press and to adjust the volume level when using the line/headphones jack. Zoom in and out Adjust the volume 2. Press Audio only when finished to put the unit back into audio/video recording standby. NOTE · If the transfer speed to the card is not fast enough during video/audio recording, "Low Speed Card!" appears on the screen and recording stops. We recommend using cards that are Class 4 or faster. Information about SD cards that can be used with this unit can be found at www. zoom. co. jp. · Even if no SD/SDHC card is in the unit, video can be recorded to the builtin memory (64 MB). However, this video can only be viewed on the unit; it cannot be copied or transferred. 11 Playing recordings Turn the unit sideways to play back recorded audio and video. Playing recordings 2 1, 2 1. Press 2. Use when on the main operation screen. and to select a different file to play Functionsofotherbuttons · · · Adjust volume Press and hold during playback to search backward/forward. Press to pause during playback and restart when paused. NOTE Only files that have been recorded with the Q3HD can be played back. 12 Erasing recordings You can erase recorded video and audio files to increase the amount of open space on the media card. Erasing recordings 1. Press while the file that you want to erase is playing. · If you press this when on the main operation screen, the last recorded or played file will be selected to be erased. 2. When the confirmation screen opens, select "Yes" to erase the recording or "No" to cancel, and then press . 1 2 13 Erasing recordings Erasing multiple recordings at the same time 1. Press when on the main operation screen or while playing to open the "Delete this file?" confirmation screen. again to open the video Press selection screen 2. Use 3 1, 4 to select a recording that . you want to erase and press 3. Repeat Step 2 as many times as necessary to select other files that you want to erase. · Press to select all files. 2, 5 4. Press files. when you are done selecting 5. When the confirmation screen opens, select "Yes" to erase the recordings or "No" to cancel, and then press . 14 Editing recordings Recorded video and audio files can be divided and trimmed. Editing recordings 1. Press 2. Use press . to open the Main Menu. to select FILE and 3. Thumbnails of the recorded files are to select a file shown. that you want to edit and press 1, 6 2, 3, 4, 5 4. The editing menu opens. Use select the item you want and press · See the following page for the editing options. to . 5. After editing, a reconfirmation screen opens. Select "Yes" to execute the change or "No" to cancel, and then press . . 6. When you are done editing, press 15 Editing recordings DIVIDE Change the point where the file will be divided Play/pause Confirm the point where the file will be divided TRIM(partialdeletion) Move trim points to set how much of the file to delete at its beginning and end Switch between the beginning and end trim points Play/pause Confirm the trim points INFORMATION(aboutthefile) Return to the thumbnail list 16 Connecting external devices Connecting external devices This unit can be connected to various external devices as needed. Connect to a computer (via USB) to edit and save files and upload them to video sharing sites With this unit's power off, connect its built-in USB connector to a computer running Windows or Macintosh. [. . . ] · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. ForEUCountries Declaration of Conformity: This product complies with the requirements of EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW. MPEGLA. COM Windows is a trademark of Microsoft Corporation (USA). [. . . ]