Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ZYXEL ES2108G. We hope that this ZYXEL ES2108G user guide will be useful to you.
Lastmanuals help download the user guide ZYXEL ES2108G.
Manual abstract: user guide ZYXEL ES2108GQUICK START GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] This Quick Start Guide is for use with all ZyXEL Ethernet switches. Your device may differ from the illustrations below. [. . . ] 1 Align one bracket with the holes on one side of the switch and secure it with bracket screws smaller than the rackmounting screws. 2 After attaching both mounting brackets, position the switch in the rack by lining up the holes in the brackets with the Your switch comes with auto-negotiating, auto-crossover ports. Depending on the model, these ports are either fast Ethernet (10/100 Mbps) or Gigabit (10/100/1000 Mbps) ports. Auto-negotiating ports can detect the speed of incoming transmissions and allow either half duplex transfer mode (10/ 100 Mbps only) or full duplex mode. Auto-crossover means that you can connect the switch to a computer or hub using either a straight-through or a crossover Ethernet cable. You can use unshielded twisted pair (UTP) or shielded twisted-pair (STP) Ethernet cables for RJ-45 ports. Make sure the cable length between connections does not exceed 100 meters (328 feet). The following table describes the types of network cable used for different connection speeds. The LNK/ACT LED should flash when data is being sent between your switch and a connected device. Connect one end of the supplied power cable or power adaptor to the power receptacle on the switch and the other end to the appropriate power source. If your switch has a console port, you can use a terminal emulator for local management. connect the male 9-pin end of a console cable to the console port of the switch. [. . . ] Also make sure the Ethernet cards are working on the attached devices. The LNK/ACT LED does not light up or flash when a device is connected. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ZYXEL ES2108G
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ZYXEL ES2108G will begin.
