User manual ZYXEL FTU2000

[. . . ] POWER: Use the power adaptor provided to connect an appropriate power source to this socket. The LED light turns green once the FTU2000 is ready. If you are using both FTU2000 and FSG2200HNU, the power coming from the FSG2200HNU is enough for both devices and there is no need to connect the FTU2000 to a power source. In this setup, the CATV service is not available when the FSG2200HNU is turned off. [. . . ] Make sure the distance between the centers of the holes matches what is listed in the product specifications appendix. Be careful to avoid damaging pipes or cables located inside the wall when drilling holes for the screws. 3. Do not screw the screws all the way into the wall. Leave a small gap of about 0. 5 cm between the heads of the screws and the wall. Make sure the screws are snugly fastened to the wall. They need to hold the weight of the FTU2000 with the connection cables. 11 5. Align the holes on the back of the FTU2000 with the screws on the wall. Hang the FTU2000 on the screws. Horizontal 12 Vertical 13 The following are dimensions of an M4 tap screw and masonry plug used for wall mounting. All measurements are in millimeters (mm). 14 Safety Warnings · Do NOT use this product near water, for example, in a wet basement or near a swimming pool. · Do NOT expose your device to dampness, dust or corrosive liquids. · Do NOT store things on the device. · Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning. · Connect ONLY suitable accessories to the device. · Ground yourself (by properly using an anti-static wrist strap, for example) whenever working with the device's hardware or connections. · Make sure to connect the cables to the correct ports. · Place connecting cables carefully so that no one will step on them or stumble over them. · Always disconnect all cables from this device before servicing or disassembling. · Use ONLY an appropriate power adaptor or cord for your device. · Connect the power adaptor or cord to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe). · Do NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor or cord. · Do NOT use the device if the power adaptor or cord is damaged as it might cause electrocution. · If the power adaptor or cord is damaged, remove it from the device and the power source. [. . . ] Select the certification you wish to view from this page. 16 ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in material or workmanship for a specific period (the Warranty Period) from the date of purchase. Check with your vendor and/or the authorized ZyXEL local distributor for details about the Warranty Period of this product. During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the defective products or components without charge for either parts or labor, and to whatever extent it shall deem necessary to restore the product or components to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal or higher value, and will be solely at the discretion of ZyXEL. [. . . ]