User manual ZYXEL NBG-510S

[. . . ] NBG-510S 802. 11g Wireless Remote Access Broadband Gateway User's Guide Version 1. 00 7/2007 Edition 1 DEFAULT LOGIN IP Address http://192. 168. 1. 1 User Name admin Password 1234 www. zyxel. com About This Guide About This Guide Intended Audience This manual is intended for home and small business network administrators who want to install and configure the ZyXEL Device. This guide assumes that the administrators who are familiar with basic network configuration. Related Documentation · Quick Start Guide The Quick Start Guide is designed to help you get up and running right away. It contains information on setting up your network and configuring for initial secure remote access to the LAN. [. . . ] Enable this option to be able to assign a default host. If you do not assign a default host, the ZyXEL Device discards all packets received for ports that are not specified in the port forwarding list or remote management. Select a LAN computer from the drop-down list box or select Custom and specify a LAN IP address. Click Cancel to begin configuring this screen afresh. DESCRIPTION Default Host Apply Cancel Port Forwarding List Local IP Remote IP This field displays the host name or IP address of the LAN computer server that receives the Incoming Service/Application. This field displays the IP address or domain name of the WAN computer that can access the LAN computer. All displays if any WAN computer can access the LAN computer. This field displays the service that the ZyXEL Device sends to the computer configured in the Local IP field. This column provides icons to add, edit, and delete entries. Click the Add icon to go to the screen where you can configure a new entry. Click the Edit icon to go to the screen where you can edit the entry. Click the Delete icon to remove an entry. Incoming Service/ Application Add icon 11. 4 Port Forwarding Add/Edit Screen Click the Add or Edit icon in the Network > NAT > Port Forwarding screen to open this screen. Use this screen to configure a port forwarding rule. NBG-510S User's Guide 83 Chapter 11 NAT and Firewall (WAN to LAN) Figure 59 Network > NAT > Port Forwarding > Add/Edit The following table describes the labels in this screen. Table 21 Network > NAT > Port Forwarding > Add/Edit LABEL Connections to be made from Remote System for Service DESCRIPTION Select Any to allow connections from any IP address or domain name. To only allow specific users to access the inside server, select Custom and specify an IP address or domain name. Select a service from the drop-down list box or select Custom and specify a port number (or numbers) and protocol. To enter a single port number, enter it in the first field. To enter a range of port numbers, enter the starting port number in the first field and the ending port number in the second field. For a custom service, select the protocol the service uses. Choices are: TCP, UDP, AH, ESP, and GRE. Select a LAN computer from the drop-down list box or select Custom and specify the IP address of a LAN computer. Select what port number the ZyXEL Device when forwarding the service's traffic to the LAN. If the LAN computer uses the same port for the service as the incoming packet's source port, select Same as Incoming Service. [. . . ] This warranty is in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose. ZyXEL shall in no event be held liable for indirect or consequential damages of any kind to the purchaser. To obtain the services of this warranty, contact ZyXEL's Service Center for your Return Material Authorization number (RMA). Products must be returned Postage Prepaid. [. . . ]