User manual ZYXEL NPS-520

[. . . ] NPS-520 MFP Print Server User's Guide Version 1. 00 11/2006 Edition 1 www. zyxel. com About This User's Guide About This User's Guide Intended Audience This manual is intended for people who want to configure the NPS-520 using the ZyXEL utility. You should have at least a basic knowledge of TCP/IP networking concepts and topology. Related Documentation · Quick Start Guide The Quick Start Guide is designed to help you get up and running right away. It contains information on setting up your network and configuring for Internet access. [. . . ] The IP address should be in the same subnet of the network to which the NPS-520 is connected. IP Address Note: The NPS-520`s default IP address is 192. 168. 1. 6. Subnet Mask Gateway Dynamic IP Enter the subnet mask of the NPS-520. Enter the IP address of the default gateway in the network to which the NPS520 is connected. Select this option to have the DHCP server (in the network to which the NPS520 is connected) assign the NPS-520 an IP address automatically. The fields below are grayed out when you select this option. Note: We recommend you give the NPS-520 a static IP address or configure your DHCP server to always give it the same IP address (static DHCP). If the NPS-520's IP address changes, you need to uninstall and reinstall the ZyXEL utility on each computer that uses it. NPS-520 User's Guide 25 Chapter 2 ZyXEL Utility Table 6 ZyXEL Utility: TCP/IP Setting (continued) LABEL Save DESCRIPTION Click this button to save your changes to the NPS-520. After you click the Save button, the following screen displays showing you the configured TCP/IP information. Click Reboot Now to restart the NPS-520 and have your new settings take effect immediately. Otherwise, click Reboot Later to restart the NPS-520 after you finish all changes. Cancel Click this button to return to the Status screen without saving changes. 2. 7 The System Setting Screen This screen allows you to configure the NPS-520's description and password, upload firmware, reset the factory defaults, restart the NPS-520 and drop the connection between the printer and the associated computer. When you click the System Setting tab, the following login screen displays. Select the name of your NPS-520 and enter the password (1234 by default). Figure 9 ZyXEL Utility: Login After you click OK, the System Setting screen appears. 26 NPS-520 User's Guide Chapter 2 ZyXEL Utility Figure 10 ZyXEL Utility: System Setting The following table describes the labels in this screen. Table 7 ZyXEL Utility: System Setting LABEL System Setting Print Server Name Enter a descriptive name to replace the NPS-520's unique generated device name (the last three characters of the NPS-520's MAC address with the prefix "ZyXEL"). You can enter up to 15 printable characters. Type a new administrator password for configuring the TCP/IP and system settings. You can enter up to seven printable characters. Please note as you type a password, the screen displays a * for each character you type. Type additional descriptive text for the NPS-520 if you want. You can enter up to 15 ASCII characters. Click this button to save your changes to the NPS-520. Click this button to return to the Status screen without saving changes. Type in the location of the . bin file you want to upload in this field or click Browse to find it. Click Browse to find the . bin file you want to upload. Remember that you must decompress compressed (. zip) files before you can upload them. Find firmware at www. zyxel. com in a file that (usually) uses the system model name with a . bin extension. [. . . ] Notices Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Viewing Certifications 1 Go to http://www. zyxel. com. [. . . ]