User manual ZYXEL ONU-6040BBF-22 V1.00

[. . . ] Connect the fiber-optic connector into the PON port. To avoid possible eye injury, do NOT look into an operating fiber-optic module's connector. 4 3 2 1 2. LAN: Use the included Ethernet cable to connect the LAN port to a computer. 6 3. CATV: Use a coaxial cable to connect the CATV port to a television or set-top box with an F-connector. Overly tightened coaxial cable may affect transmission quality and/or break the connector pin. 4. [. . . ] · Check the connector on the optical cable and the PON port. Use an air duster to clean the connectors. Do NOT use a wet cloth to clean the connectors. If the cable is broken, contact your service provider to have the cable/connector replaced. Do 13 NOT attempt to replace the optical cable/ connector yourself. If the PON light is off, see 2 The PON light is off. If the PON light is on, contact your service provider and make sure the video signals can be transmitted successfully. The CATV light is on but no video is displayed. · Check the coaxial cable connection between the CATV port and your TV or set-top box. · Check that the TV is turned on. Try using another coaxial cable if you're unsure. · Check the port connections and the lights. · There might be problems with the optical network setting. Contact your service provider. 14 Specifications Specifications are accurate at the time of writing. Feature Dimensions (mm) Weight Interface PON One PON port Compliant with IEEE 802. 3ah PX-10 (ONU-6040BF-21) PX-20 (ONU-6040BF-22) SC optical connectors with shutters Transmission distance: 10 km (ONU-6040BF-21) 20 km (ONU-6040BF-22) Wavelength: 1310 nm upstream and 1490 nm downstream, 1550 nm analog receiver for CATV Four 10/100 Mbps RJ-45 ports Auto-negotiation Auto-MDIX Female F-connector Wavelength: 1550 nm, 47 ~ 870 MHz 12 VDC @ 1. 5 A 15 Specification 181 (Wide) x 123. 4 (Deep) x 41 (High) < 1 kg Ethernet CATV Power Supply Feature Operation Temperature Storage Temperature Operation Humidity Storage Humidity Safety EMI Specification 0º C ~ 45º C -30º ~ 60º C < 95% RH < 95% RH EN60950 -1 FCC Part 15 Class B, CE-EMC Class B Safety Warnings · Do NOT use this product near water, for example, in a wet basement or near a swimming pool. · Do NOT expose your device to dampness, dust or corrosive liquids. · Do NOT store things on the device. · Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning. · Connect ONLY suitable accessories to the device. · Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY qualified service personnel should service or disassemble this device. [. . . ] During the warranty period, and upon proof of 18 purchase, should the product have indications of failure due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the defective products or components without charge for either parts or labor, and to whatever extent it shall deem necessary to restore the product or components to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal or higher value, and will be solely at the discretion of ZyXEL. This warranty shall not apply if the product has been modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. Note Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This warranty is in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose. [. . . ]