User manual ZYXEL P-660D V3.40

[. . . ] P-660R/H-D Series ADSL 2+ Gateway User's Guide Version 3. 40 11/2005 Edition 1 P-660R/H-D Series User's Guide Copyright Copyright © 2005 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved. Disclaimer ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein. [. . . ] This drop-down menu is used to configure the frequency of log messages being sent as E-mail: · Daily · Weekly · Hourly · When Log is Full · None. If you select Weekly or Daily, specify a time of day when the E-mail should be sent. If you select Weekly, then also specify which day of the week the E-mail should be sent. If you select When Log is Full, an alert is sent when the log fills up. If you select None, no log messages are sent Use the drop down list box to select which day of the week to send the logs. Send Log Log Schedule Day for Sending Log Time for Sending Enter the time of the day in 24-hour format (for example 23:00 equals 11:00 pm) to Log send the logs. Log Select the categories of logs that you want to record. Send Immediate Select the categories of alerts for which you want the Prestige to instantly e-mail Alert alerts to the e-mail address specified in the Send Alerts To field. Back Apply Cancel Click Back to return to the previous screen. Click Apply to save your customized settings and exit this screen. Click Cancel to return to the previously saved settings. 15. 3 Displaying the Logs Click Logs and then View Log to open the View Logs screen. Use the View Logs screen to see the logs for the categories that you selected in the Log Settings screen (see Section 15. 2 on page 154). The log wraps around and deletes the old entries after it fills. Click a column heading to sort the entries. A triangle indicates ascending or descending sort order. Chapter 15 Logs Screens 156 P-660R/H-D Series User's Guide Figure 76 View Logs The following table describes the fields in this screen. Table 47 View Logs LABEL Display DESCRIPTION The categories that you select in the Log Settings screen display in the drop-down list box. Select a category of logs to view; select All Logs to view logs from all of the log categories that you selected in the Log Settings page. This field displays the time the log was recorded. This field states the reason for the log. This field lists the source IP address and the port number of the incoming packet. This field lists the destination IP address and the port number of the incoming packet. This field displays additional information about the log entry. Click Back to return to the previous screen Click Email Log Now to send the log screen to the e-mail address specified in the Log Settings page (make sure that you have first filled in the Address Info fields in Log Settings). Click Clear Log to delete all the logs. Time Message Source Destination Notes Back Email Log Now Refresh Clear Log 15. 4 SMTP Error Messages If there are difficulties in sending e-mail the following error messages appear. [. . . ] ACL set for packets traveling from the WAN to the LAN. ACL set for packets traveling from the DMZ to the LAN. ACL set for packets traveling from the DMZ to the WAN. ACL set for packets traveling from the WAN to the DMZ. [. . . ]