User manual ZYXEL P-661HNU

[. . . ] P-661HNU-Fx 801. 11n Wireless ADSL+ 4-port Security Gateway Default Login Details IP Address Admin User https://192. 168. 1. 1 User Name: admin Password: 1234 User Name: user Password: 1234 www. zyxel. com Firmware Version 3. 10 Edition 1, 10/2010 www. zyxel. com Copyright © 2010 ZyXEL Communications Corporation About This User's Guide About This User's Guide Intended Audience This manual is intended for people who want to configure the ZyXEL Device using the web configurator. Related Documentation · Quick Start Guide The Quick Start Guide is designed to help you get up and running right away. It contains information on setting up your network and configuring for Internet access. · Support Disc Refer to the included CD for support documents. Documentation Feedback Send your comments, questions or suggestions to: techwriters@zyxel. com. tw Thank you!The Technical Writing Team, ZyXEL Communications Corp. , 6 Innovation Road II, Science-Based Industrial Park, Hsinchu, 30099, Taiwan. Need More Help? More help is available at www. zyxel. com. P-661HNU-Fx User's Guide 3 About This User's Guide · Download Library Search for the latest product updates and documentation from this link. [. . . ] Similarly, give low priority to many large file downloads so that they do not reduce the quality of other applications. Click Network Setting > QoS > Class Setup to open the following screen. Figure 73 Network Setting > QoS > Class Setup The following table describes the labels in this screen. Table 40 Network Setting > QoS > Class Setup LABEL Add new Classifier Order Status Class Name Classification Criteria Forward to DSCP Mark To Queue Modify DESCRIPTION Click this to create a new classifier. This field displays the order number of the classifier. Select the check box to enable the classifier. This shows criteria specified in this classifier, for example the interface from which traffic of this class should come and the source MAC address of traffic that matches this classifier. This is the interface through which traffic that matches this classifier is forwarded out. This is the DSCP number added to traffic of this classifier. This is the name of the queue in which traffic of this classifier is put. Click the Edit icon to edit the classifier. Click the Delete icon to delete an existing classifier. Note that subsequent rules move up by one when you take this action. Apply Cancel Click Apply to save your changes. Click Cancel to restore your previously saved settings. 182 P-661HNU-Fx User's Guide Chapter 10 Quality of Service (QoS) 10. 4. 1 Add/Edit QoS Class Click Add new Classifier in the Class Setup screen or the Edit icon next to an existing classifier to configure it. Figure 74 Class Setup: Add/Edit The following table describes the labels in this screen. Table 41 Class Setup: Add/Edit LABEL Class Configuration Active Class Name Select to enable this classifier. Enter a descriptive name of up to 32 printable English keyboard characters, including spaces. DESCRIPTION P-661HNU-Fx User's Guide 183 Chapter 10 Quality of Service (QoS) Table 41 Class Setup: Add/Edit (continued) LABEL Classification Order DESCRIPTION Select an existing number for where you want to put this classifier to move the classifier to the number you selected after clicking Apply. Select Last to put this rule in the back of the classifier list. Forward to Interface DSCP Mark Select a WAN interface through which traffic of this class will be forwarded out. If you select Unchange, the ZyXEL Device forward traffic of this class according to the default routing table. This field is available only when you select the Ether Type check box in Criteria Configuration-Basic section. If you select Mark, enter a DSCP value with which the ZyXEL Device replaces the DSCP field in the packets. If you select Unchange, the ZyXEL Device keep the DSCP field in the packets. To Queue Select a queue that applies to this class. You should have configured a queue in the Queue Setup screen already. Criteria Configuration Use the following fields to configure the criteria for traffic classification. Basic From Interface Ether Type Select whether the traffic class comes from the LAN or a wireless interface. Select a predefined application to configure a class for the matched traffic. If you select IP, you also need to configure source or destination MAC address, IP address, DHCP options, DSCP value or the protocol type. [. . . ] This device generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio/television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ]