User manual ZYXEL P-870HW-51A V2 QUICK GUIDE

[. . . ] · Internet Explorer 6. 0 or later or Netscape Navigator 7. 0 or later, with JavaScript enabled. See the User's Guide for all configuration details including file sharing and setting up a shared printer. To read the User's Guide insert the CD that came in the box into your CD-ROM drive. Navigate to the User's Guide from this screen. [. . . ] Turn the P-870HW-51a v2 off, wait for a few seconds and turn it back on. If the LEDs are still off, contact your local vendor. 6 ENGLISH Testing Internet Connection After you have connected the hardware and turned on the P-870HW-51a v2, open a web browser on your computer and go to any web site (for example, www. zyxel. com) to test your Internet connection. If you are prompted for a user name and password, enter the account information as given by your Internet service provider (ISP). Initial Configuration 1. Open your browser and enter http:/ /192. 168. 1. 1 (the P-870HW-51a v2's default IP address) as the address. Enter the admin user name 1234 and password 1234 (default). Click OK. If the login screen does not display, make sure you allow web browser pop-up windows, JavaScripts and Java permissions. Your computer should be also set to get an IP address automatically from a DHCP server. See the appendices in your User's Guide for more information. 7 Internet Setup When your Internet connection is setup correctly, the DSL and INTERNET lights should be green. If you cannot access the Internet and the INTERNET light is off, make sure you enter the correct information in the WAN screens. If you are using a new Internet account, contact your ISP to make sure it is active. If you are trying to access the Internet wirelessly, make sure the wireless and security settings in your wireless client are the same as the settings in the P-870HW-51a v2. Wireless Setup To create a wireless network the P-870HW-51a v2 and your wireless computer(s) must all use the same SSID (network name), channel and security settings. Enable wireless LAN, enter a name to identify your wireless network (such as "ZyXEL") in the SSID field, and select a channel which is not used by neighboring wireless devices. Select your security mode and configure wireless security settings. In this example, the P-870HW-51a v2 uses WPA2-PSK for data encryption. If you do not set wireless security, any one within range could use your P-870HW-51a v2 to access your network and the Internet. 8 ENGLISH Make sure your wireless security settings are compatible with your existing wireless devices. See the User's Guide for more information on wireless networks. 9 Setting Up a Wireless Network with WPS You can use Wi-Fi Protected Setup (WPS) to set up a secure wireless network and add wireless devices to your wireless network at the touch of a button. The other wireless devices must also support WPS. Look for the WPS logo on the housing of your device. Place a WPS-enabled device within range of the P-870HW-51a v2. Press the WPS WLAN ON/OFF button ( ) on the P-870HW-51a v2 for five seconds. Press the WPS button on another WPS-enabled device. [. . . ] Make sure the screws are snugly fastened to the wall. They need to hold the weight of the P-870HW-51a v2 with the connection cables. Align the holes on the back of the P-870HW-51a v2 with the screws on the wall. Hang the P-870HW-51a v2 on the screws. 11 7. [. . . ]